FLSUN V400 Enclosure,Constant temperature for more accuracy with advanced materials Provides a Quieter Printing Environment(V400 Enclosure)

I like that these can be installed and removed quickly. The covers themselves feel very well built. They are a premium product.

Works as it should although company should tell buyers to put some grease in the columns and the hovering knobs or which ever door you use the most will begin to scratch the paint in the columns. Other than that it's cool looking works as it should cleared up a lot of adhesive issues as well. Will be getting another one for my other V400 also .

This should have come with the printer. Without this it will warp prints with the slightest breeze. 200.00 for 3 peices of plastic... You can get files for a diy enclosure but I couldn't get a flat print so couldn't build my own. Once these came everything printed flat with greater adhesion. This should have come standard as the v400 is almost worthless without this additional part.

I needed to get the enclosure for the V400 as I print in the same room often occupied by my wife, so I needed to quiet it down. While the enclosure does quiet the noise heard from the fans, the polycarbonate actually increases the acoustics from the stepper motors into a dull hum. I suspect the hum was washed out from the cooling fans on the extruder before I got this enclosure. Either way, enclosure makes the machine look like a million bucks and does quiet things down...but need to set expectations here, it is NOT "as quiet as a mouse" like FLSun advertises.Even more annoying, the enclosure makes use of the slide channels in the frame of the V400. So, if you like many others have printed any of the very handy tool holders, or the speederpad display holder, you won't be able to use these anymore with the enclosure. Pretty annoying to have to give up that organization. This enclosure should at maximum be $100. I suspect they jacked the price up due to shipping fees. I have been a longtime FLS customer, love the products, but I feel like this enclosure should have been better engineered even with some acoustical dampening, might help the stepper noise.ADDED, this enclosure is also a dust magnet. No matter what I do, dust always is attracted to the plastic. 1 day after dusting, it looks like in the photos.

Pros it's quiter now not silent but quiet, it's very easy to assemble 3 panels and 6 support pieces they also gave the stl to make more supports for the panels. it works as advertised I haven't tried printing PA (nylon) yet but will shortly. In terms of downsides do not get the enclosure if you are tight of head space I had to lower my table to put it on there's also no real quality in the product it's not worth 200 usd (at the time of purchase) I'd say half that at best there's no hinges for a door it just slides on the existing rails and you can't leave it open when printing as the arms will hit the enclosure side overall 3.5 out of 5 it works well but definitely could use some quality upgrades and price drop and to top it off there's no insulation around the panels so there's alot of air gaps