Gas and Electric Meter Box Covers - Weather-Resistant Overboxes for DIY Repairs - Protect and Enhance Your Meters - Durable Meter Box Protection - (White)

2nd one I have bought

I do not understand why it was acceptable for my garage to have an electric supply with no cover, but that's what I faced when I moved to my house recently. I needed a 60cm tall, 40cm wide and 10cm deep cover with door, and this cover seemed to be just about perfect. I did end up fixing an extra 2cm thick wood perimeter for this cover to attach to, giving me a 12cm depth total. The entire installation took about an hour including the extra wood, so it was quick and easy. I am very happy with the outcome, and no longer worry that my kids will do something dangerous with the exposed supply. Recommended for this type of application. I suspect it also works perfectly for the intended application of covering a damaged supply box.

Does what it is meant to do and works perfectly. Easy to fit and looks professional

Tight fit, looks good, easy to use. They come with an ‘e’ or a ‘g’ on. We ended up with the wrong letter, but weren’t offered a choice. Can be used either way up if you ignore the letter to allow door opening (hinges) from either side.

Good construction and easy to install. Suitable to replace damaged meter enclosure door or frame. Once installed provides a good secure cover to electricity and gas meters.

Yes, you can fit it upside down. I did! In my photo you will see the “gap” or “inset” is at the top in my photo. Make sure you fit it at the BOTTOM. The door catch is designed to work best with this gap at the bottom. Fit it the other way around and the catch can vibrate into the unlocked position. I have rectified this on mine, but learn from my mistake.Other than that, the box is exactly as others say. Easy to fit, looks lovely afterwards.One other thing. If, like me, you have an inset steel electric box with a full length piano hinge on the door, you will need to drill out the rivets that fix the door to the case to remove the old door. When they start to spin, they can be remove by chiselling the last bit off. (Old flat head screwdriver & a hammer).Secondly, you will need to screw two 15mm / 3/4” battens or furring strips on each side of the old box to give you the additional depth you need as those steel boxes are deeper than 66mm. Screw the cover to the strips and seal around with white silicon.

Quicker than stated delivery, next day by Parcel Force. Product is as expected, a white plastic box. Time will tell how durable it is but seems fine. Easily fitted and door can be hung left or right. Delighted to find this as I really didn't want the hassle of finding a local person that would replace the whole meter box - hinges were broken so needed more than just a new door.

easy to fix only needed one but did them both in the end