Daylight Company DN1510 , Duolamp_Clamp_White

After reading several reviews I thought I would add one after purchase. After 3 months use I can recomend this product, made well, really like the clamp and ease of use. You can easily attach it onto a table or easel. Great light coverage, superb split lamp eliminates that annoying shadow effect of your normal angle-poise lamp. I use it for a A1 drawing board and a portable easel. If you are looking for lighting for a wider, larger lighting area suitable for studio easel, this wouldn't cover say a 30x40 canvas as the goose neck k is too short to adjust. I purchased two and find if you do require extra light coverage, I can attach both at each corner. Mains powered without that annoying power brick, cool in use and ecnomical for long use . I see this company is about to release a wider range of artist lights, so one to watch as prices for these things have always been crazy.

Very easy to put together. Because this light is slender and has an elegant slim design, you would need to be particularly careful how you use it. I’m an artist and it’s used at the back and slightly to the side of my easel. There are four settings and the ‘touch switches’ are operated at the end of the tubes. Both tubes are independent. So you don’t need to have both tubes on at the same time. The base is heavy, but it needs to be?The tubes are really super and mimic daylight really well. I just love the modern design of this lamp and the way you can position the tubes.......someone has really thought it out nicely!As long as you leave it alone when using it, and don’t let kids mess with it! and you screw up the sections really tight so there are no loose joints, you should be OK. It’s not the kind of lamp that would take rough treatment or too many bad knocks.You can’t change the led’s because they’re integral, but should last for years.I think this lamp is a lovely design, if a little on the delicate side! However, it’s very good at what it does - gives a daylight effect, and I personally think it’s a first class ‘cool’ piece of kit. JUST BE CAREFUL WITH IT!Not for the kids room or where it could get bumped into by big dogs!? This lamp is for discerning and gentle people!Since buying there have been disappointments from other people who have bought this lamp....I cannot understand for the life of me how the thread can be lost on the bottom section......if you cross thread the thread - that’s your fault, not the manufacturer? If you overload it’s electrical capacity it will naturally melt the innerds! If you leave it on for hours at a time it’s going to get warm.Use your head folks.p.s. Make VERY sure you tighten each section properly. Wrap a piece of leather ( or similar) around each section and using pliers gently apply pressure until the joints are nice and tight. Better still get a handyman to do it for you if you don’t have tools. It is ABSOLUTELY ESSENTIAL YOU TIGHTEN THE SECTIONS PROPERLY AND SECURELY.

The media could not be loaded. Brilliant Daylight lamp, ideal for artists alike,Adjustable button control for brightness for each arm of lamp.Highly recommended for artists.Value for money

I like to update reviews after a period of use. This review is based on my initial test since the light will be used by my crafts-crazy better half!Anybody that does crafts will know that you need very good lighting (operating theatre lights aren't for show, after all!) because fine detail only becomes clear when you have a lot of light on the work area. Bright light is also essential for determining colours properly, as anybody that does cross stitch or other "thread-based projects" will quickly tell you. We already have a couple of reading lights in strategic parts of the house but wanted something a little more portable but steady, and more daylight-like full-spectrum light which is where this comes in.It is still a floor lamp, with the size and the base weight that entails, but the base isn't too heavy to move because the light itself is light and hard to topple. I decided to buy the version with forked lighting arms so as to minimise the problems of her ladyship working in her own shadow.Assembly is required, but the light is already practically completed and the assembly is only to screw together several sections of the upright and the bendy lighting element at the end, and screw those into the base. The cabling already runs through all of these parts, so it is pretty obvious how it is intended to be put together. When it is all together it's actually rather unobtrusive (a thin white pole, in fact) and isn't exactly unattractive to look at anyway. The lighting arms at the end can be splayed to various degrees or brought together - and these contain the LED elements that put out all the light.The lighting takes a moment to figure out. There are what look like on/off switches on the end of each splayed lighting arm (the universal power symbol of circle and line that looks like a stick in the top of a flowerpot) but these don't seem to be switches because there's no click, you just touch the lighting arm in that area and the light comes on.If the light seems too dim, you simply touch the lighting arm to get another stage of brightness, and you can cycle through the brightness levels back to the OFF setting, what's more, you control the light level from each arm individually.The lights also seem to cover a decent work area, and because the top of the lamp is a gooseneck arm that holds the lighting elements, it can be manoeuvered around and directed fairly well, and if intensity is needed it can probably be moved a little closer to the work area, a tabletop for instance, to get a few more lumens on the workpiece.So, is this "daylight"? Well, it's a substitute. I tend to see daylight as being a bit more blue than the purer white that seems to come from these LEDs, but there's no question that they are much better for colour and detail work than most lights in our homes.If her ladyship flags any shortcomings with this light I will certainly update this review because that's what I do, but my feeling is that this will fix the problems involved in detail work and with colour-matching of threads and fabrics.

It was a great help when working on my embroidery. Works well and has a variety of strengths which came in handy.

I needed a good light for my hobby space and this is perfect. The flexible neck and clamp means it was easy to get it into the right position for my set up. Being able to split the 2 lamps means no shadows and I can see everything I need to see when painting Warhammer minis. The light is really bright and the rouch turn on and turn up works nicely. At under £40 the prive is pretty good too.

Love this lamp. Easy to put together. Two lights are moveable and can be used separately or together. Upper part of stand is flexible also. Easy to switch on and off and vary the light intensity. Highly recommend!

I love this. It's a great light which I use for lashing people. It's super bright when set to the max. It has 4 different brightness settings. It is easy to assemble and very sturdy.

Éclairage travaux peinture artistique

Bel design, solida, leggera e completamente snodata. In grado di illuminare l'ambiente di lavoro analogamente ad una luce diurna. Indispensabile per lavori artistici o di precisione eseguiti in casa nelle ore serali. In particolar modo nella pittura in cui risulta necessaria un' intensa luce bianca per poter miscelare i giusti toni di colore.

Buona luce. Sufficiente per dipingere.

Travaux manuels Article décevant la prise ne correspond pas aux normes donc déjà il faut modifier le branchement le sytème d'interrupteurs trop sensible.

The light does not put out heat, so my head stays cool. I tilt them slightly so there is not a reflection off the tv screen and I only need one tube on. I try to keep it low so it does not light up the whole room. I am a cross stitcher. Love the tap on the end of the tube, so much easier than looking for the switch on the floor. Light Colour is good for showing the slight differences in thread colours. Definitely recommend a daylight brand floor light.