SEALIGHT X4I H13/9008 Bulbs, H13 Fog Light Bulbs, 55,000LM, with Adjustable Lock Ring, Cooling Fan, Easy Installation, Pack of 2

If you struggle to see at night this is the set for you. I have had this set in my truck for several months now and I will never go back to regular lights again. It’s like driving in the daytime. I live in Colorado with lots of dear that would love to rearrange the front of my truck but no more. Easy to install, good price, and the brightest on the market that I could find.

Installed these on a 2017 Ford F-250 with quad halogen. It took a few months for me to find time to get them installed. Once installed three on the four worked great, lower right was flickering on and off. Got a hold of customer service, sent out a new set even though I was out side the return widow. Swapped the light for a new one problem still continued with both new bulbs. Assuming it was a wiring or BCM issue with the truck since it was only one light. Did diagnostics and continuity tests, boiled it down to a headlight controller issue. Replaced the headlight controller, the problem still continued, but had now started on both lower lights. Being stumped I reached out to customer service again, turns out I should have started there. They knew right away it was a decoder issue, promptly sent out additional canbus decoders free of charger. Installed decoders upon delivery and the issue stopped and all light work excellent. Very bright, good beam pattern out of the box no indexing needed, fit headlight housing perfectly and tight seal. Cooling fans a very quiet compared to pervious brands I've used, had to put my hand behind them to verify they were running. All in all a great light and excellent customer service.

Extremely bright and that I no longer even need my high beams anymore because the low beams go at least 25 yards out and cover part of the side of the road

Ordered them In January 2024. They shipped on Feb 3rd and arrived on Feb 7th. I installed them per the provided instructions. The lights would light up and do a great job so long as I do not start the engine. With the engine running the leds would slowly blink on and off every 2-3 seconds then after about 15 seconds they stay off. I called the company and was told to email for a decoder. Here is the initial email response I got back:Dear customer,Thank you for your email. This is an automated response to let you know that we are currently out of the office for the Spring Festival holiday from 7th Feb to 17th Feb. During this time, we will have limited access to email and will not be able to respond to your message promptly.If you encounter decoding problem or need replacement, we have replacement or decoders for you. So if possible, please do not return the bulb back to Amazon and use your halogen bulb first.You just need to leave us the following information1、Your order number and your car year make and model2、Your light problem3、Your addressThen we can send you decoders or replacement as soon as we see your email after holiday.Thank you for your understanding and I wish you a happy New Year.Best regards,SEALIGHT Service TeamI waited and waited... on Feb 23rd I emailed and called about the decoder. The person on the phone verified my make/model/year/etc.. of my truck and that it used the 9008/H13 bulbs. On Feb 28th, I received a package with two sets of decoders. I call them on March 4th to find out which I was to use since there was no instructions included. On the phone I walked through make/model/year/etc.. of my truck and that it used the 9008/H13 bulb and was told they had sent the wrong decoders and were sending out the correct one to me. At the time of my writing this, it is March 14th and there is no sign of the correct decoder so these are of absolutely no use for my truck.

Way brighter & than my OEM halogen bulbs even though description is inaccurate (Says “55,000” lumens but truth is 2 bulbs = 28,000/1 bulb = 14,000 lumens). FYI: Bulbs must be installed with spade protrusion vertical & led light pads to the right & left at 3 & 9 o'clock position. The forward most LED light pad is the low beam & should be on top. The rearward most LED light pad is the high beam & should be on the bottom. Also, if wiring is reversed (Switch on high beam & lights on low beam/Switch on low beam lights on hi beam): Wires in my 2019 Jeep Renegade headlight wiring connector could be moved. Problem is there are 3 black wires & no way to tell which ones are High beam/Low beam/Ground. After some research found looking into the connector plug with the clip lock up the 1st wire to the right is the ground for both headlights, the middle & left wires are the high/low beam (See pic). Once I removed the purple retainer & released the clips the middle & left wires could be removed & positions swapped on both headlight connectors making high/low at the switch high/low it the lights.

Great brightness, semi ez install (17 expedition) you will need an aftermarket dust cover for high beams. The high beam is a very tight fit but overall easy swap and impressed with brightness I may need to adjust bulbs but I will leave a few photos of before and after don't mind the messy yard, I have three kids and we go to the beach often. 😅 Mind you I do not have projector headlights.

These are the best and brightest headlights I have ever seen! My boyfriend and nephew were so impressed, they got some for their vehicles after these were installed on my car. They are some of the brightest on the road and have helped me spot many deer on these back-country roads at night, well before I got close to them. Mine are blue-tinted, too, which helps them stand out even more. I will always get these lights when and if they need to be replaced. I've had them for 3 years so far, and they are still going strong.