Cooler Master MasterBox MCB-B600L-KANN-S00 ATX Mid-Tower with Sleek Brushed Design, Red Side Trim, & Acrylic Side Panel, MB600L Red Trim

I just used this case to build my brand new custom desktop. When building my PC I had a few requirements that were non negotiable. In my old system I had a BluRay Drive that I was going to use in my new build so I needed a case that had at least one external 5.25" slot. I wanted the side of the machine to be open enough to show off the LED lights I had planned for the system. The case also needed to look modern and not break the bank. I found many cases that were awesome looking but only had small windows on the sides, or didn't have a external slot or were flimsy or a combo of all three of those. When I found this case I went over it many times looking at it and finally decided to get it.Its a large case, just incase someone wants to know, I knew it would be large so that is not an issue for me. Building the machine in here was great the external drive slide in and locked super easy. Cabling was easy and with lots of room was able to hind all of the cables. The full glass side shows off the LED lights and all components great! It comes with just one fan which for me needs right now is great. It has plenty of space for additions fans.I would fully recommend this case to anybody looking to build a custom PC.

I build quite a few PCs. My last case was an NZXT, and it was fine. It was also over 100 bucks.I've been putting together some other computers for work and a couple of friends. I went through several builds before getting this case. I really like the fact that it hides your psu, and leaves room in the back for hiding cables.Its a bit small for an ATX Case, but it fits everything in very nicely. I had room for Water cooling and it fit the gigantic RADEON RX5700XT nicely. Really pleased with the build, and the plastic side window comes on and off easily and is very light and clear. Exterior Is sexy and sleek. That's a Cooler Master Master Liquid LC240E in there, and I swapped out the stock chassis fan with a red led from Corsair.

I bought the MCB-B600L-KANN-S00 version of this case, and it was one of the smoothest installs I've done, and looks very clean. The case feels light, though it is steel, and is robust enough so it does not feel weak when loaded up. The illuminated buttons (white LED's), and the top edge panel ports, are well placed, and also give it a nice quality look. There are tons of places to zip tie wires, and the cable management basement and side areas are sufficient, considering the number of drives it will hold (2 x 3.5" HDD (or SSD), 1 x SSD in the tray, and the 5.25" optical drive). I'd recommend a modular supply though since stuffing excess wires in the basement will probably be a pain. There are 4 total locations to mount the SSD tray, but it only comes with one, and two of the vertical mounted locations could be blocked if the front of the case is set up with more than one fan. There is a mesh panel on the underside to act as a filter for the power supply intake which will face downward. The other openings in the case however do not include filter mesh screens so I expect there will be some dust inside after a while. Getting the 5.25" drive cover off was a bit difficult, but after wedging a flat screwdriver in from the back side and pushing it into the case it popped out.So to summarize:Pros:* Nice looking case which uses good materials where they matter.* Illuminated buttons (white).* Good cable management, and lots of tie points for wires.* 4 places to mount SSD's.* Tooless drive installation for the 3.5" HDD's and 5.25" drive.* Includes one fan (needs min 2 but it's set up so a radiator could be used in front in place of a fan).* Thumbscrews for all the panels and PSU bracket.Cons:* Not all the openings are filtered so it will collect dust.* They should provide at least 2 SSD trays since there are 4 mounting points for them.* It's a bit noisy as there is no sound deadening.This s a nice case for the money, and a solid 4 stars.

For the price, this case is great.Pros:- Good ventilation (might want to add additional fans, but I wouldn't worry about it)- Great size- Enough room to put a full sized GPU with enough head room to worth it- It's Aesthetically pleasing especially at this price point ($39 USD) so perfect for a budget build or any kind of build in general- Can change the trim colors to black or white (which are included in the box)- The transparent "glass" which in reality is plastic looks awesome and you don't find these much on budget casesCons:- Only complaint I have is cable management. There's just not enough room in my opinion so you'll have to plan ahead for this.Overall, still giving this a strong recommendation.

I bought this case and noticed how suffocated my system was when I put the front panel on. The front panel is made of clear plastic which looks good but does not let any air in. What i did was just take the front panel off and flip the PC on its face. This renders the front usb useless unless you're gonna put a wireless dongle there but it saved me money and saved my anger towards cooler master for another day.Turns out it was a genius idea since i've never seen a system like it, and reduced my temps. My system is breathing again and has a really nice slanted look i've never seen before.