3D Pen, 3D Printing Pen, 3D Printer Pen, 3D Drawing Pen for Kids, Adults, Friends Compatible with PLA Filament,Doodling, Artist, DIY, Drawing, 3D Pen (SL601 Black)

I am extremely impressed by this filament, and you should be aware the color is more a "Highlighter Yellow" than the Amazon stock picture seems to show. It's lighter and in single layers, fairly translucent.All testing was performed on a rebuilt / modified Wanhao / PowerSpec / Duplicator i3 (same as a Monoprice Maker Select v2).Printer Modifications ~ RepRap Champion Upgraded Aluminum Y Carriage / RepRap Champion Aluminum Heatbed (silicone heater), solid / bolt bed mounting (no springs), AnyCubic Ultrabase (on silicone pads, no tape, no clips), Noctua 40x10 fan on the extruder, Micro Swiss machined lever and plate, Micro Swiss All Metal Hotend, Antclabs BLTouch, connected to a MKS GEN 1.4 with A4988 stepper drivers and an external MOSFET for the heated bed. Cooling is currently an interesting hybrid rear mount, but is not quite adequate for needsTestingSlicing done with Slic3r and notes were taken for each iteration of a test. Extrusion multiplier was set to 98%Box was well constructed, but has some poor grammar and needs some correction.I liked the facts and figures on the back panel of the box with information about different filament types, nice to have around.The vacuum seal was very well done, but it is not a resealable bag sadly :(Of note, there was a QC tag in the within the bag, along with a silica desiccant sachet.The filament seemed well rolled and it was straight (not lumpy or bumpy like it had been put on the roll poorly or rewound).Out of the bag, the initial weight was 1130 grams. When I get done with the roll, I'll weigh it again and see if it was a 1 kg or not. This is an excellent way to keep track of how much you've used of a roll, and a good opportunity to write the date on the label of when you opened it.Initially the filament width was about 1.74mm, and varied between 1.74mm and 1.76mm when measured via calipers throughout my testing (about 1/4 of the roll).I performed a Temperature Tower, with temperatures starting at 230c and going down to 190c. Results were very similar throughout the range, with the best bridging being at around 210c (but also a good bridge @ 230c oddly). Layer adhesion was solid throughout.NO SCENT. Though, looking at the it print it seemed like you should be smelling lemons.20mm cubes were produced, 5% infill, and I adjusted my steps to size correctly. By the 5th cube I was getting within a few hundredth of target.Adhesion was very good at all temps and speeds. Infill was a bit interesting, since some of my infill for some tests was single wall, the translucency of the filament made it almost look like it was under-extruding (but it wasn't).It's surprisingly difficult to photograph, so forgive the quality of the pictures. Feel free to ask any questions you might have!

Disappointed ... I ordered yellow but the filament that arrived was black! Sticker on the manufacturer's package indicated yellow, so I guess Dazzle Light needs to check for labeling mistakes.I thought I'd just try the black filament anyway and swallow the cost, but the prints I get aren't as good as the yellow filament prints, color aside.I'll try ordering another yellow filament and see if I'm imagining things . . . if I get another roll of black,I'll be returning it.

Really nice bright yellow! Perfect PLA. Had no problem printing for 4 days straight.

Product came in sealed bag but was not air tight. Filament was dried and brittle.

The box and sticker on the outside says yellow, the filament inside is brown and the sticker on the bag the filament is wrapped in says brown.Packed wrong from the factory I guess.

I really low how bright this is and how well it prints. I have used this in 2 different machines and hasn't needed any calibration. It prints great at 200C. Love it

I'm fairly new to 3d printing but I'll give you my take. For the price, you really can't complain one bit. Everything I printed with this PLA filament turned out awesome. The color doesn't fade at all and stays the same as it is on spool. I took measurements of the filament in several places and only varied by .01 it maintained a 1.74 to 1.73 throughout spool which in my opinion is fantastic.With a clean glass build plate 0 heat applied, and stuck extremely well to bed, in fact I had a hard time pulling it off the bed. I melted it at a temp of 120 degrees C with a nice flow and no burns.Definitely will purchase more of this and try different colors and types. Well done.

Nice bright color. Its a little more neon than primary so keep that in mind. Lays down well.