FOCEAN Boat Flooring EVA Foam Boat Decking Marine Flooring Brushed Texture Marine Mats for Boats Yacht Kayak RV 94.5" x47.2"/ 23.6"/15.7"

Overall, this works extremely well for what it is. I needed something for the bottom floor of my bass boat that wasn't carpet. The problem with this area in a bass boat is that it never seems to dry once it gets wet. It's too covered and low in the boat. I've heard a lot of good things about the EVA foam, so I gave this a try. Make sure you are using a brand-new blade to cut this and change it often! You can pull/rip the foam if you don't. The instructions state you can use spray adhesive if you want more adhesion. I opted for that route just because I didn't want to risk this coming up. The adhesive may have been enough on its own, I'm not sure.I knocked off 1 star because as you can see in the picture, it has some lines that kind of run through it. I assume this is where it feeds through the machines that process it. Some of the lines are kind of deep and easy to see. Doesn't affect the product at all, just not cosmetically perfect. Still worth buying if you are in need of a similar product!

This EVA decking material is actually incredible useful for more than just boat and marine applications. I have used this material on everything from lining the bottom of a dog trailer (towed behind a bicycle), to a an electronics workbench mat, and flooring on my kayak. This particular roll that I ordered was intended for my workbench. This particular brand/roll of material has modestly good adhesion. I did notice that this roll has some cosmetic issues. There are long streaks the entire length of the foam material (see photos). This is caused by the large rollers during manufacturing being dirty and cutting into the foam. It is cosmetically unpleasant, but does not effect the performance. If you are planning on using this on a boat, be aware that if you apply it to HDPE surfaces (i.e. a kayak, canoe, or starboard hatches), you will not get optimum adhesion. This material works best on fiberglass/gel coat surfaces. The way this foam material is professionally cut is with a CNC laser cutter. For do-it-yourself applications, the BEST way to cut this material is with a really large, long pair of fabric scissors. If you use a razor blade or dull scissors you'll have frayed edges. Exposure to heat from the sun will help activate the adhesive and increase bonding strength.

I really like all of the FOCEAN Boat Flooring EVA Foam Boat Decking Sheet Non-Slip Brushed Marine Flooring with self-adhesive. The material is strong yet soft on the feet. I can tell it is a durable material that should hold up.You can use this in a boat, an RV, a car, and just about anywhere. I am using this cool blue camo pattern EVA foam as a non-slip flooring for a drum set in a home studio setting, and I could be happier with it. For me the self-adhesive is holding great as I would expect. The camo pattern hides shoe scuffs and dust until it can be wiped down - it cleans up pretty easily and being water proof you don't have to worry about it getting wet. The material is about a 1/4 inch thick.It doesn't absorb water, it is UV protected (mine is not in the sun so I can't confirm that), and it is easy to trim if you need to cut it to fit your boat/RV/studio - whatever.This stuff is great, they have so many different colors and patterns to pick from your sure to find one that will compliment whatever you're installing it in. The only downside, and the reason for 4 instead of 5 stars, is the price. This stuff is a bit spendy. But if the price is in your budget, I recommend FOCEAN Boat Flooring EVA Foam

My son has really gotten into fishing, so at the beginning of spring I bought a used john boat for us. It works fine, but boy does it look like a piece of junk. At one time it was probably nicely carpeted, but what remained...well the bits reminded me of the fur on a very mangey dog. We have already finished painting almost all of it, and both of us were really looking forward to adding some new carpet.My son wanted to black and white camo version, but we ended up with the blue camo. This stuff installed so easy. We burned through a few blades for the utility knife and I think we have a carpenters pencil m.i.a., and we killed a few cans of some 3m spray adhesive from the auto parts store. That's all it cost us to do the job. We already had a couple tape measures and also this contour measuring/replicator tool I had used to lay some tile.It honestly looks like we bought a kit of pre cut pieces for our particular boat. It looks great, but best of all, my son is so darn proud of it. I mean he practically beams when he's telling someone about, let alone showing someone.So needless to say, it was a great project. Excellent results in more way than one. The instructions mentioned using some additional adhesive, so that's why we used the 3m spray. It was just that yellow spray glue for auto trim and weather stripping. It worked fine, but I honestly don't know if it was necessary. And this stuff is easy to clean too. Pretty much just hit most of the muddy spots, etc with the hose. There were maybe a few spots my son had to hit with the britstle brush, but I'm positive nothing took more than 2-3 strokes max . But we mostly just had to hose it out.So I'm happy with this stuff. My son is happy with it. I'd use it again in a second, lol

I'm really happy with this ocean camo color EVA foam boat decking. It looks and feels like it’s good quality. I used a metal ruler as a straight edge and it cut really nicely. It came rolled up tight, so I laid it out in the sun for a bit to flatten it out.I decided to use it to add some cool accents to the underside of my SxS roof. I cleaned up the plastic with mineral spirits first, and it stuck down really well. I rolled over it with a rubber roller to get it down nice and firm.I’m a bit curious to see how it’s going to hold up, especially if the black plastic roof gets really hot in the sun during the summer. I’ll keep an eye on it, and if I run into any issues, I’ll be sure to update this review. So far, I'm pretty pleased with it!