ELEGOO Neptune 4 Pro 3D Printer, 500mm/s High Speed FDM Printer with Klipper Firmware, Auto Leveling and Direct Drive Extruder, Easy Assembly, 8.85x8.85x10.43 Inch Printing Size

This was my first ever FDM printer, I bought this 3d printer to print some home interior stuffs...which was a great decision. If you are also a first time user, then don't hesitate go for it, printer worth the money. -Print in a slow and steady speed for better quality end results, because too much printing speed does not looks good :) -I had this printer for now like 4 months and printed like close to 50parts, never had a major issue printing parts, its all about getting the right setup, including the print speed/temperature/fan cooling, lot of resources online should help you get the good setup. -Performance of the printer is amazing, i even had the printer run for close to 12hours non-stop, yet the printer managed to give the final out put flawlessly.

Good For PLA material Printing and heating Speed is good.

one part missing all ready used products

Good product

Estoy comenzando a aprender a usarlo, tiene la opción en configuración para elegir el filamento que vas a usar y por default maneja diferentes temperaturas para cada cosa, al principio para que esté bien balanceada, debes usar una hoja y calibrarla con las ruedas que tiene por debajo en cada esquina hasta sentir una ligera fricción, atención, no apretar de mas para que la boquilla no raspe el trabajo que vayas hacer y asi no tengas problemas más adelante. Si usas otro modelo sacado de internet busca que este centrado, porque intenté con una espátula pequeña pero se imprimía en una esquina y la impresión falló, pensé que era la máquina, así que imprimí con el poco filamento que quedaba solo la base de otro buda y quedó excelente, así que tenía errores el modelo de la espátula. Es una máquina muy rápida, dependiendo si es mas grande en el programa orca slicer, elegoo cura, que son los que use, viene el tiempo que tardará y los gramos que usará del filamento, más sinembargo es un estimado porque al pasar el USB a la impresora maneja otro tiempo pero no es mucha la diferencia, otra cosa que me gustó es que llega antes, me imagino dependiendo la zona, pero lo bueno es que la caja llegó entera sin daños, todos los accesorios vienen dentro, solo que el manual no venia en español, pero uno lo puede conseguir de la pagina principal de Elegoo.

La verdad muy buena impresora, el paquete llegó de Estados Unidos a México sin problemas. La impresora funciona de maravilla. Buena velocidad de impresión. Una excelente compra sin duda.

I bought this believing I was buying a good product, that Elegoo stood behind their product. I used my neptune 4 pro for about a month and a half with no problem. I loved how quick the prints were, and the quality was great. I bought the three-year warranty in case I ran into problems. One day my print failed but only at the last part of the print. It started knocking the supports off and making a mess. I haven't been able to get a good print since. I contacted the warranty company, and they sent me back to Elegoo. I have been working with them for about a month, trying everything they asked to no avail. I think I have re leveled the print bed 50 times. The prints work for a few layers, and then it starts acting rough. I have wasted more than a spool of filament through his process. I have tried PLA and PETG to see if that had anything to do with it. I updated the firmware as directed by Elegoo. The problem continues. After all the back and forth, I decided to just buy a new motherboard, only to find out they aren't available anywhere. Frustrating. I'm glad that I didn't buy the plus and/or max as I planned to do. You cannot replace the motor drivers on the motherboard like on other brands. I have a Artillary and Flashforge that I have been happy with.

Tiene mucho desfase en la impresión, las partes más delicadas las rompe a pesar de ponerle una muy baja velocidad de 60 mm/seg, por eso la devolví, por encender la luz me cancela la impresión, no vale la pena invertir en un producto de pésima calidad, por algo elegoo se enfoca más en impresoras de resina, y ni así es un buen competidor, recomiendo impresoras de Creality o FLSUN

My new HP copier died. This machine did not. This elegoo printer is the best affordable and high quality intro to 3D printing. The parts provided, tools, and starter filament are all fantastic. I am another one to say that it did work straight out of the box and producing high-quality prints though results may vary. Because of the nature of the printing experience, it’s very important to understand fundamentals of how the machine works, and make sure certain things are adjusted properly and certain things are tightened. Regular maintenance of the machine would be recommend. I’ll begin now with faults here which are related to the setup. The setup of the machine and use is not fully detailed in the manual. There are several things to pay attention to, that’s not in the manual. For instance, they don’t tell you that the build plate is magnetized onto the machine and you remove it after a print and the bed cools, then you flex the plate to get your print job off. Took me a good moment to find this out. Other things left out are related to setup and maintenance. Do research on the machine before you get it, and you’re certainly more likely to have a good printing experience. It also does have a couple software faults maybe to keep aware of. I had a print job fail to resume after pressing pausing it. And I’m not sure if it had anything to do with how my model gcode was written by the slicer. Also keep aware, be sure to remove your model after a print. Further actions you might take after you return to the home screen are not aware of whether any material is still on the build plate. So if you’re not careful, you could run the print head into your build and destroy things including the printer. Furthermore, the machine is not WiFi connected and I thought it was supposed to be. I’ll have to check on that later, however it still does have an Ethernet jack. Now onto print fails. Running the printer at high speed is nice, but it can introduce problems in both the machine and prints. Be sure to upgrade the machine maybe if you want super high speed like advertised and use a high speed filament. The servo motors can do it though. My other fail is possibly from a bad slice from Cura slicer. Cura provided a warning about the STL I was printing, so I’m assuming that the print issue there was not related to the printer itself. Lastly, the auto bed leveling is working well. It took time because some of it is still manual. Again, experience may vary and do your research. Overall, as a first time user, I’m extremely satisfied because I’m a user that understands nothing is perfect and overall, elegoo has put out a noteworthy milestone in 3D printing. I’ve also attached a photo of my 3D benchy for reference of print quality