QualGear PRB-717-WHT-50FT Projector Ceiling Mount Kit with 50 ft Type A Male to Type A Male Cable - White

Very good and sturdy, the only issue is it has so many adjustment points that the quick release (on mine anyway) doesn't work because the screws that adjust the roll get in the way. I imagine (if I could be bothered) that a tiny amount of filing on the edge of the hooks for the quick release would fix that but I never wanted to remove it anyway so it's fine. On the assembly side, this is the best self assembly product I have ever purchased. All the screws, bolts, washers etc were in separate bags and labeled, this was then referenced in the manual which is very good also.

Great value, supplied with myriad of fixings and adjusters. Very solidly made and inspires confidence that this will hold my jvc projector safely and securely. Highly recommended. Would buy again without question.

Very sturdy. There are lots of bits that need to be put together but do come all in the box. Its doing its job atm but does seem to move slightly every now and then even when fully tightened

I bought this for a BenQ W2000 and then later a Benq W1700. As a buyer of previously expensive brackets like Vogels I was hesitant to buy this as it was really low cost, but thought I would try it anyway. I have to say it was a breeze to fit to the ceiling. I used two long screws and screwed it into a ceiling joist. Then I fitted the bottom part to the projector, using the parts in the kit, which took around 10 minutes. Then the bottom part hooks over two bars in the top part, and you tighten with the tools included (A spanner and Allen key).(Instructions I thought were fine) I found it easy to adjust to whatever position I wanted, and for a projector like the BenQ W1700 and BenQ W2000 it was fine. I later tried to fit a heavier projector to the bracket and found 2 problems. 1) The bottom part was extremely hard to get off the top part if you need to, I mean I really had trouble, I had trouble changing the Benq W2000 to the W1700 and almost panicked trying to get the projector down, it was not easy. 2) The third projector was much heavier and eventually I gave up as the mount wasn't strong enough, and so kinda flopped.So took it down completely and bought a table instead. So my final advice is this, If your after a low cost bracket for a projector like the Benq W1700 or W2000 and its pretty much going up to stay for an extended period of time, then this is great. Its easy to fit, easy to adjust, and seems robust. If you foresee a need to change the projector any time soon, or thought it was going to be easy to take the projector down for servicing, then I would think really hard here. Its probably not one of the prettiest things I've ever seen, but as its behind where I sit, I didn't notice it :)

Considering how cheap this bracket is, I was pleasantly surprised by the quality. It is very sturdy, and all movement and play can be removed by tightening the various screws. It can be canter levered in any direction if needed, and the legs can be expanded to different depths depending on where the mounting points are on the projector.

Was a little hesitant purchasing this to hold my £800 projector when the recommend manufactures mount is over £100 but I shouldn't have been. The build quality is excellent, lots of adjustments available to perfectly get your projector in the right position. Lots of extras included to enable you to mount onto virtually any projector. Mine only has 3 mount holes and an awkward lip bit I managed to fit the legs no problem, had to use an extension to clear the lip and a couple of extra washers but all good. You can mount on a wall or celling and it comes with a drill template. I managed to locate a beam in the celling and installed using the two large bolt headed screws. Feels really solid on the ceiling, no movement at all. There is no length extension but it holds the protector approx 6 inches from the ceiling which was fine for my needs. A real bargain.

this thing is a great little mount plenty of adjustment. The one thing id like is if the rotation joint was a little stiffer I found that if I have to change the focus on the projector the whole thing can rotate but in all honesty once its set up you should never need to touch it again. it had all the parts and plenty of spares to mount my projector.

Excellent piece of kit for the price. Feel like I’ve underpaid for what I have received. Would highly reccomend. Very very easy to set up and assemble. More than the nessessary required hardware is given to the customer so you are not left short.

El material es de calidad, de buen grosor, muy resistente. Se adaptó a nuestro proyector Epson Powerlite S39 sin problema. Trae todo lo necesario para la instalación. Como yo lo puse encima de mi cama, le puse otros traqueteos expansivos por seguridad porque los que trae son de plástico. Si sabes usar un taladro, la instalación no es complicada.

Very good product with so many possible options for various projectors. Used it to install OPTOMA UHD60 and it works. Pros.: Convenient to hang and to remove the projector with designed hanging bracket, Ability to adjust the projector any direction Simple to assemble and use Black color Ability to use with equipment up to 30lb Tools included Cons (or in need of improvement): 1. Spacers seem only to fit perfectly on projectors with recessed mounting hole, and UHD60 mounting holes are not recessed. Most likely minor imperfection, but what it means that either the projector’s housing or the next bracket bottom spacer (depends on how you oriented) will only contact with protruding part of the spacer on one side. Again, there are 4 points of mount so if all tighten correctly, no need to worry. However, it would be great if the kit came with standard flat on both sides spacers as option. 2. Small but worth mentioning, out of the box the mounting bracket needed to be aligned before assembly. 3. Also, it would be great if the all adjustments had integrated marks/lines starting with 0 in the center. That way it’s easier to calibrate to ideal 0 tilt position and adjust from there based on your condition(s), this would also make it easier for smaller precise adjustments.

Ordered one day, got it the next. Very, very good quality metal and assembly, better than I expected for the price. Had read other people who had bought this mount say that it didn't come with the screws to fit their projector and it was hard to figure out. The mounting to the projector was a little interesting at first but looking at some pictures on line and letting my imagination work, it wasn't bad. Reading about the screws and such, i had already stopped by the home improvement store and bought extra screws and washers for "just in case". ended up using the shorter screws and a few washers that I had bought instead of the ones that came with the until. Quality of the bolts, nuts, washers that the mount is built with is good, but the tools they provide aren't very good. The Allen wrench is OK, but the box wrench is near worthless, have a 10mm box end wrench handy for the adjustments. Mounting to the ceiling was easy enough. Finding the correct place for mounting is harder than the mounting itself. My projector is light weight and the mount doesn't weigh much so I had plenty of room to play, and was lucky enough to come near a ceiling stud, so adapted my measurements to use that stud for two bolts. I did use shorter lag bolt than the ones furnished, made the job easier. I think I spent about $3 on extra materials (bolts, screws, washers). Mount looks nice up on the ceiling even though it doesn't have the fancy covers some of the more expensive mounts have. If your projector weighs less than 25-30 pounds, there's no reason, so I thought, to spend more money. My ceiling is 11' and not vaulted, my projector weighs just over 6 lb.

Easy to install, very adaptable. Was the easiest part of the projector installation - comes with clear directions, the 'arms' can easily be tailored to fit virtually any projector. HDMI cable is thick and sturdy.

Like it