3DDPLUS 1.75mm PLA 3D Printer Filament White- 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm

Prints great, little to no stringing, bright white. It's packaged in a very Chinese style packaging but it is vaccum sealed with a desiccant and so far it's been printing great.Prints better than my pastel blue Solutech and black LabelPros filaments and its rolled perfectly with no tangles (unlike the LabelPros one).Update 10/8/19:I updated my rating from 5 to 3 stars.This filament is highly sensitive to moisture (more brittle, stringy, poor layer adhesion), much more than all my other filaments. I had to dry 2 times in the past 4 months.

I was looking for a decent filament at a good price, and thought I'd take a chance with 3DDPLUS (RainbowMe) filament for a large project I was working on. I used White (lots of white, 4 spools worth), Black, and Silver for it. 3DDPLUS offered all the colors I needed, and after finishing the project I'm pleased by the prints. Other than a few failures on my part, and the fun of breaking in a new machine, I had zero issues with this filament. Great stuff! Have and will buy more when it's available if it's an option for future projects.

It's a decent filament, not the best. The color is more of an egg shell(dull) white than a true bright white and had some issues with rough flat sides that I never had with some other filament brands, so we swapped it out for our usual brand after 1/4 of the roll was gone.

I've gone through most of the roll, have tried various settings, dried the filament, up temp, down temp - you name it, I've done it and I get very erratic results.

Did a 26 hour print without any issues what so ever. Had far less success with filaments that cost more, worth a shot. For the cost its hard to beat.

Some of the cheapest PLA filament on amazon... but it works great. Good interlayer bonding, smooth surface finish, no defects or inconsistencies. Runs are well as the stuff costing 2x or more. It arrived vacuum bagged and I've printed several big jobs with it without a hitch. It seems to like 205 degrees on my Prusa with a V6 bowden extruder.Great filament! I'll be back for more.

My printer got clogged up once when i switches filament halfway, which i think was from the other filament but otherwise good

I got both the white and red. They have been the only filaments I've used that have clogged my printer nozzle on two different printers. I got a couple ok prints, but it's not worth the time to unclog the nozzle after use. Also, if you have an original Prusa with bondtech gears, this filament will not work for you. No matter how lightly you have the gears tensioned, this will get ground off by the sharp teeth. I would not buy again, and will probably just have to toss this in the trash, because I don't want to give it to a friend and cause them the headache I've experienced.