Antminer S19k Pro 120T 2760W ASIC Bitcoin Miner - High Efficiency, Includes PSU, in Stock (S19k Pro 120T)

Fast shipping and came in on time.PDU reads 238.5V at 16.61Amps so running 3962W. Could easily change some setting on the miner to get it lower but with the increase in hash rate not going to bother.A little higher on the power consumption but its running between 210TH and 230TH on a couple of different poolsMake sure you get a PDU to plug into, I had ordered a power cord but the unit arrived with one in the box

Received brand new shiny miner in sealed anti-static bag. Runs a little better than advertised.

The machine was delivered in good condition, and the packing was excellent. after unpacking. I quickly realized the wrong power cords were sent. They sent two 120 volt power cords, and they should have been 240 volt power cords. I ended up purchasing my own cords. I was able to get the machine up and running. And as I proceeded to the software side, I quickly realized that the machine was having network problems. After much research. I feel I might have a bad networking card in the computer. As of today, I still haven't got it working. :(

Came in but was broken fan and the boards inside where rattling

Llego antes de lo esperado, lleva 20 días aproximadamente funcionando sin parar y sin ningún problema, espero que siga tal como está, volveré a comprar otro lo más seguro, ¡gracias! 😊

Arrived with dead control board--boots but no DHCP traffic. Fortunately I know enough to order a good board; there essentially is no warranty, so don't expect help from the company. On the plus side, control boards are only about $50.

Antminer S19 90Th... and it's running at 60Th...And the seller never answer.