BTF-LIGHTING FCOB SPI RGBNW(4000K) Flexible High Density LED Strip COB WS2814 IC RGBW LED Strip 5M 784LEDs/m 21W/M DC24V White PCB IP30 Chasing Colour(Without Controller and Power Supply)

I have had cob lighting in the past and prefer this to LED lighting as it's a continuous colour opposed to 'dots' of light on a LED strip....However, I haven't the slightest clue what I am supposed to do or what the ends clip into?With no instructions or a 'plug' I'm left with this 1 metre roll of cob lighting still on the reel.

The media could not be loaded. The BTF LED COB Strip will be used in a slat wall feature, we will be mounting 5x 2m LED strips vertically in alluminium profiles, a lot of time was spent researching various brands, types, LED density, compatibility with WLED controllers. These are by far and away the perfect fit for our project, fit exactly in 1cm profile, diffuse well with an opal diffuser and are easily controlled.It was essential that the LED strip had a high density so that the light strip was diffused and it wasn't possible to see the individual LEDs, in this case 784/LEDs per metre, we are very pleased with the effect.These strips are individually addressable in sections and WLED will connect and control the strips, enabling many different styles, patterns and colours with full App/Web Control. The short video shows the 'Washing Machine' pattern.You can cut the strips and connect using the available BTF connectors, these connections allow the strips to be cut down to various sizes and connected with the correct wires, in this case 24v, Ground and Data. I would strongly suggest the connectors rather than trying to solder wires.The strip is 24v, with 2x5m length strips connected there is some voltage drop across the whole length, however its easy enough to inject power at the end of each 5m length, bringing a uniform brightness across the whole length.

Used it in conjunction with the WLED Project on a ESP32 controller.Only thing to be careful of is making sure you look at the direction arrows before connecting up

Si tratta di una stripe RGBNW, quindi con diodi dedicati al bianco. Stripe programmabile in gruppi di 4-5cm circa. Su lunghe distanze, l'effetto é quasi identico a strisce indiviualmente programmabili. L'ho installata in cucina su una lunghezza di 5 metri circa, usando il controller "GLEDOPTO WLED"OCCHIO ALLA DIREZIONE DELLA FRECCIA. Essendo una strip programmabile, é alimentabile (e controllabile) solo dall'inizio della stringa, non dalla fine. Tecnicamente é possibile almentarla anche dalla coda, ma ciò non vale per il pin del segnale. Occhio!

Mise en place rapide grâce aux autocollants, les couleurs sont assez pâles de manière générale, le but est surtout d'avoir une lumière tamisé donc ca ne posera pas de problèmeLa télécommande est livrée avec sa pile, et là aussi aucun souci, tout fonctionne bien !

...fließende, grelle Effekte: Je nach verwendetem Treiber lässt sich das mit diesem sehr gut gemachten Farb-COB-Led-Streifen erreichen. Er ist dabei nicht spürbar besser als der eines Konkurrenzherstellers aber teurer - Vergleiche lohnen sich besonders wenn man den Preis pro Meter und ggF. benötigte Netzteile, Treiber und Fernsteuerung einkalkuliert. Jedenfalls topaktuelle, tolle Technik!

Bonjour,ce n'est pas la première fois que j'utilise une bande led adressable. (mais vraiment pas la première fois, je pense commencer à avoir une bonne expérience)et le contrôleur que j'ai utilisé fonctionne avec une autre bande led.Après plusieurs essais, j'ai fini pas considérer que la bande avait un défaut / panne.Voila. désolé.

Der 1m lange LED-Streifen eignet sich gut kleine Experimente oder Bastelprojekte.Mit WLED (im Internet googeln) kann man den Streifen ohne großes Fachwissen ansteuern und ein bisschen rumspielen.Wie gesagt: ein Meter ist nicht viel - aber für ein PC Gehäuse oder ein kleines Regal ausreichend/perfekt.Klare Kaufempfehlung!