Wrought Iron Style Exterior Handrail on Two Pivoting Bolt Down Posts These versatile handrails are an affordable DIY method of adding a handrail to your property. The handrail pivots on the two posts, this allows the handrail to be installed down a slope, on uneven ground or down a small flight of steps. The handrail is designed to sit at approx 90cm high, the ideal height for holding onto. Specification Top handrail - 40mm x 12mm convex half moon solid bar Posts - 40mm x 40mm box section with a plate welded to the bottom in an offset position, with four pre-drilled holes, if opting for a bolt down post. The plate is welded in an offset position to allow you to place the post flush against a step etc if needed. The holes in the base plate are drilled to 9mm. The handrail extends 20cm beyond the post at each end. Therefore a 1.2m long handrail will consist of 20cm of handrail, then a post (4cm) with 72cm of handrail between the two posts, a second post (4cm), with a further 20cm protruding at the other side of the post. Finish - Zinc primed and powder coated gloss black - the zinc provides protection against rust whilst the powder coating provides a smooth finish. Guarantee All our products carry a two year guarantee against faulty workmanship. Unfortunately we cannot guarantee against rust as this is a natural effect on iron. All our handrails are available in 20cm increments and the lengths quoted are the full length of the rail including the curls at either end.
ترست بايلوت
منذ أسبوعين
منذ شهر
