Evolution Power Tools R210CMS Compound Miter Saw, 8-1/4" Multi-Material Cutting TCT Blade Included Cuts Wood Metal Plastic & More, 45° - 45° Degree Miter & 45˚ Degree Bevel Angles, 1200W, 8-1/4"

Surprised the heck out of me....cut dead square out of the box....light weight and leaves a clean finish thats cool to the touch.

I bought this for my friend to start his window business.. He loves it! It's a real monster machine that gets the work done just the way it's supposed to. Highly recommend this product

Great mitor saw for everyday use but after many uses to cut metal the metal shavings start to stick and melt into platic. Other than that its safe and reliable easy to use for a good price.

Purchased this to cut 2020 extrusions. Unit performs the task admirably... at 90 degrees, and after some set up. The on board angle markings are a joke, completely useless. Thankfully, I only needed the 2020 cut square so it was easy to set with a machinist square. If you need a special angle, have a way to measure it not using the saw markings. Even with a Vac on the port the chips went everywhere, all directions. I'd recommend only using this where a mess can be made. All that said, the cuts are clean, smooth, no burs, no chatter, and FAST.

Thought it was kind of neat at first even though the plastic knobs feel like the prize out of a box of cereal.... the clamp is completely useless, the degree pointer on the swivel is off and I had to use a heat gun to put it on but it's useless so you just have to use a Square to Square it. But the part that just made me get on here to give a one-star review was that I barely got 10 cuts on 1" × 1/8" angle, the blade is smeared! I guess it shouldn't be advertised as a metal cutting saw, there is plastic in bad spots also that the chips melt to. If it cut more then would have dealt with it but this thing completely bricked on me right in the middle of a project. Did I mention that the clamp is completely useless? I only payed $100 for this after it was on sale for $120 and I had $20 in Amazon purchasing credit....still sending it back.. I already had a 10-in miter saw but I thought this was going to be something special instead of a money pit for blades. I'll just continue using my portable bandsaw to cut steel. This thing should not be advertised as a multi-purpose metal cutting blade or we should be given a realistic life expectancy for cutting steel.

This may show as a multi-cutting blade and I’m sure its fine. I bought it for my small woodworking shop. I also saw how expensive the blades are. But you can run 5/8” arbor blades in this beauty. Just remove the stock blade, turn the arbor collar around and it says right there only for 5/8” arbor. It’s convertible right out of the box. I run a 60 tooth blade and it’s fantastic.

Well, good luck getting an accurate miter. The main problem is that the blade has slop from side to side. The blade doesn't clamp in place completely so it has some wobble. Makes this mostly unusable for anything requiring accuracy. For 150 bucks it should at least hold the blade tightly. I'd return it but I missed the return window. Maybe I can turn a better clamp washer on my lathe to salvage this. Disappointed. Update: This is unsalvageable. Nothing can be done to get an accurate miter cut. It's basically just a chop saw for rough carpentry. I don't need that so this is just going to a donation center. Complete waste of money! I have worked in machine shops and have been a wood worker for 30+ years and I can tell you with certainty this is not a good product and does not meet a reasonable standard in regards to accuracy. There is nothing exact in the bevel adjustment: "Achieve up to a 45° finish on your workpiece by loosening the bevel handle and using the bevel scale to get the exact angled tilt required." - Not. All adjustment attempts left a 1/32 or more difference from top to bottom on the cut on a 2" perfectly square piece. That doesn't fly. Do yourself a favor, buy a real saw. Spend a little extra for a good brand. Not only that but their replacement blades are way over priced.

Absolutely the perfect tool for my Closet retrofit project. This saw easily cut wood shelves as well as metal hanging rod tubing. Both with the blade that comes with it. A very light touch during cutting is all that is required and there were a lot less sparks than you normally get with a cutting wheel while cutting the metal tubing. Packaged well, just plugged in and it was ready to cut. Highly recommended!

Scie compacte et légère mais puissante et polyvalente. À date je l'ai essayé sur du bois et du plastique, elle coupe un 2 x4 en 2 secondes et une feuille de plastique aussi facilement. Je m'attend à un rendement comparable avec d'autres matériaux. J'en suis très satisfait

Me gustó mucho la sierra en vdd, no esperaba menos , en lo que si me fue mal en el envío algun transportista golpeó la caja y llego rotación una parte de la maquina , y pues la vdd tardo 14 dias en llagar y ya no pienso regresar la, pues no afecta su función solo es una manija de plástico rota

Right out of the box with the multi cut blade that came with it was amazing it cut so clean and honestly I was a little bit nervous using metal on metal cutting but I put my big boy shorts on and just did it and had a grin ear to ear im happy to use it on my small projects but I'd like to have another clamp for the other side but not needed thanks

Muy buena sierra, me sorprendió lo fácil y exacto que corta, corte PTR tipo marco de calibre 18 y lo corto muy bien (sin chispas), hice corte en 45 grados y muy bien, la verdad me sorprendió lo fácil que lo hizo, seguro hay mas sierras de este tipo, pero esta sierra SI la recomiendo (no son herrero ni carpintero, hago trabajos de vez en cuando y me funciono muy bien). No le he probado con madera, pero si el metal lo corto muy fácil, seguro la madera no representará mayor problema, por ultimo, su disco se ve de buena calidad, me llego en su paquete original muy bien empacada, la verdad la recomiendo, sin duda la nueva generación de sierras multinacionales.

Amazing saw for tube and smaller flat bar. I just put it through an 2" .25 wall square tube and it ripped through it no problem. It also weights almost nothing.. perfect for field work.