Nilight Ditch Lights Push Button Switch 12V ON Off with Connector Wire Kit 1.28" x 0.87" Replacement for Toyota Sequoia Highlander Tacoma Tundra 4Runner RAVR Yaris

So I wanted to use a switch that fit into the factory covered space locations in my 2008 tundra, to get rid of an after market light switch which hung down from under the steering wheel when I purchased the vehicle.This fit in the hole and is functional, the switch came with the connection and long enough pig-tail to hook to the existing after market lighting wires.I will say, while this does work, and light, it does not 100 per cent fit flush... it is sunk in just a little (all the time) not just when turned on. If your OCD is like mine. this may not be the best solution out there..... it is 1000 percent better than a dangling switch under the steering, but it may not be my permanent solution.DrB

Probably the best way to get a factory fit switch if you don't like the round style switches that come with most lighting. I used this switch in my 2018 4Runner and it fit right in with the rest of my switches. I went from 3 wires on my Baja Designs to 4 with bright illumination. Instructions are clear. Feels like a good switch if you like factory style and fit.

This little switch works great. Used it to replace a single light switch. Now I can use my 2 light bars separately. Easy to wire. Just pay attention to the included simple instructions. I really like that the illumination switches from. Blue to green when the switch is turned on. Worked so well I added a second one. Now 4 lights in 2 switch slots. Photos try to show the color.

Installed in an 08 Tundra, the button isn’t quite flush with the panel when not pressed, as pictured (and quite recessed when it is pressed). Was easy enough to hook up to a Nilight wiring harness, and used a fuse tap to hook into the ACC circuit. Wish the wire leads were a little longer, but it worked well enough.The blue lights don’t match the rest of the orange backlights, but I knew that when I bought it, just wish it was an option.Edit: I moved the button to a different spot (other side of the RSCA Off button) and it sits at the correct depth. The pins inside the button for the pigtail bend very easily so limit the number of times you connect them together

Doesn't fit 2008 style Highlander. Switch works fine, but it sinks too far into the blank slot in the dash (by the wiper defroster button and dash backlight dimmer switch) so once you turn on the lights you can't turn them off, the button must be hitting the edges of the dash cutout. So if you're buying this for a 2nd gen Highlander, look elsewhere. I taped the back of mine with electrical tape to keep it from locking into the slot for the time being until I find something better that works.EDIT: So today on a whim I decided to see if it fit in a different "blank" spot, this one being the closest to the steering column, and to my surprise it fit and works perfect. In the other blank next to the windshield wiper defroster button it didn't work. Strange. Plan on trying it in different unused switch spots, they're not all the same I recon.

The media could not be loaded. The absolute perfect fit for my ditch lights setup! Love this switch. Looks great. Stays lit. Love it! I drive a 2013 Toyota Tundra. Fit is perfect!

Bought this to replace the button included in my aftermarket kit cause the original button used a green LED and I wanted a blue LED to match the rest of the RAV4.The only thing I don't like about this is the bottom "Fog Light" text is lighted with the interior lights, while the top symbol is what gets lit up when the lights are on.

Very cheap quality. I keep buying these things and they keep giving up after a couple pushes. I just bought another two and they are defective. Save your money and buy a different brand.