Rough Country Cold Air Intake

Has been working very well so far. Well worth the buy. Installation was easy. Throttle response is good and have notice an extra couple likes per gallon. The noise level has change and sound really good though. Only thing that could be different is the clamps. Overall very good product. I am a rough country fan already with many of there aftermarket set ups

I recently installed the Rough Country air intake, and I’m extremely impressed with the overall value and performance. For the price point, it delivers performance comparable to brands like K&N, but at a fraction of the cost. And shipping ONE DAY! The airflow improvement over the factory intake is immediately noticeable. Throttle response feels sharper and more responsive, and while I wasn’t expecting a significant change in sound, there is a clear and aggressive tone when accelerating. It adds a nice performance sound without being overwhelming. Installation was straightforward and user-friendly. It took me about 35 minutes to complete. Those new to DIY installations may need a bit more time, but overall it’s a simple process. I would recommend picking up four 1-inch hose clamps ahead of time, as they are not included in the kit. The unit I received had a small cosmetic dent (shown in photos), but it does not affect performance in any way. Overall, this intake offers excellent performance, sound, and value for the money. I would highly recommend it to anyone looking for an affordable upgrade over stock.

Glad I assume the negative reviewers were not to be trusted and ordered this. It went on easy (less than an hour), it looks awesome and it's already made a difference in one day. My truck idles smoother and I love the little growl it has when I get on it. Let's address a couple things in the negative review... The inside of the pipe being dirty as several have said. Mine wasn't, but I still balled up a towel and pushed it through with a piece of PVC pipe just to make sure. If you don't want to do that, don't buy a DIY install of a cold air intake. Just take it to a professional, who will do that on everyone they install to make sure it's free of dirt and debris. The kit didn't come with the four little hose clamps. Mine didn't either, but I assume any person attempting to DIY install a cold air intake probably has a jar of misc sized hose clamps on their workbench. I grabbed four and it didn't really impact the install at all. Seriously, if you are looking for a cold air intake that isn't insanely over-priced, this is the one. It's great quality and it's still at a great price too!

I'm very impressed with the quality of this product. It is by far not perfect but for the price the value is unbeatable I'm not expecting much at this price point. I installed this on a Chevy Silverado with a 5.3 L the sound is amazing did seem to sharpen up my throttle response a little bit. I did have a little bit of debris in the tube I simply ran a microfiber towel and pushed it through with a cleaning rod installation was very simple and easy took less than an hour clamps are not the best but they do the job I wouldn't suggest buying four 1-in hose clamps as others have stated for vacuum lines just make sure the lines do not kink. All in all this is a great value at a great price and I'm very pleased with the results.

Makes engine sound more rowdy. Maybe a little more pep . Fits good looks good performs perfect

Decently priced. Easy to install. However, there was a spot on the outside of the tube where the powder coating had been scratched, like it had been rubbing up against something. Also, the end of the tube on the air filter side was bent, like it had been dropped. Had to get a hammer and massage it back to round. Plus, the hoses going to the engine were too big. Had to hunt down some hose clamps due to the kit not supplying any, claiming their no clamp fit. Maybe company needs to spend a little more time actually installing these intakes as part of their quality control, and paying more attention to defects before shipping out product.

Easy to install took about 30 minutes. Big difference in power. Throttle response is night and day for stock to this. Seems well built and sturdy . Gives off nice aggressive sound. Installed on a 2018 chevy silverado with the 5.3L that is tuned and chipped. One thing I will add that I added to this is hose clamps for the 2 hoses from intake tube to valve covers for extra security from accidentally popping off. They didn't but I just added them for good measure.

To start off the pipe came scratched and bent , on the intake side like it had been dropped. I had to get a pair of channel locks and straighten it round. when installing 2 of the clamps seized and stripped the threads “ hand tightened, with a screwdriver handle /adapter to the socket “ : one of them seized half way then couldn’t get off or tighten up , the other seized when taking off pipe to replace the first broken one . “Which I then had to twist/cut the clamp off-then, had to go buy another set of 3.5” clamps from a diesel shop to replace the broken ones. 20$ later. Another thing is that the kit didn’t even come with clamps to tighten the rubber hoses to the valve cover , I had to make another trip to the store to buy those aswell ! Another 8$ on top of that . All in all not worth it in my opinion, I should have spent the money the first time & got a better kit. I understand it wasn’t much to begin with but nothings worse than getting something and it being mistreated, having cheap parts, and missing .

Super easy install notice a big difference while towing

Excelente producto, a un precio increíble

Purchased this cold air intake for my 2017 GMC Sierra. Install was very easy took me under an hour. Despite some other reviews of the air filter falling off I have not had that issue. Build quality is great & kit looks awesome on my truck. Had to source some small gear clamps for the hoses that go from the valve covers to the intake tube so the hoses would stay secured. Paired with an exhaust this kit gained me about 2L/100KM when driving conservatively. Sounds great as well! Well worth it for the money Would recommend!

Instal was very easy, clamps all fit and work well on my 2017 Silverado. Great upgrade for a reasonable price!

None of the hose clamps fit. Had to cut half inch off the pipe as it wouldn’t fit.. missing one of the hoses to connect to the valve covers. Do not buy this kit save yourself time and hassle and buy a better one.