FTTH Fusion Splicer Tool Fiber Cleaver for Optical Fiber Cable TK-711 Cut with 48,000 Times Cleavers

الوصف

Description: This product is designed and researched fully on the basis of safety. It is required to read the notices and abide by them in order to safely use this product. This guidance should be kept for the convenience of reference. 1.It is forbidden to decompose or oil the product in order not to cause break down. 2.It is a Precision machine. If the machine is stricken or fallen on the ground(shocked), the cutter may be destroyed or workers may be injured; therefore, workers cannot be too careful to use the machine. 3.It is forbidden to touch the sharp cutter with hand (or other parts of the body) to avoid injury. 4.Fiber and fiber chip is very thin with sharp top, resulting in hurting fingers and eyes. Therefore, workers cannot be too careful to operation. Fiber chip should be thrown in the special trash can different from regular ones. 5.Cutter should be kept in the dry and clean container when on one uses it. 6.It is forbidden to use the machine when there is break down or any abnormal condition. It is discouraged to tear or modify the machine without the help of experts. Please timely contact the service department. Note: The fiber surface should be clean enough that there are no other things. Easy maintenance and adjustment: 1.Height adjustment of blade A.Unscrew height locking bolt B.Rotate height adjustment jbckscrew C.Fasten the blade fixture bolt 2.Place change of blade cutting edge: A.Unscrew the blade fixture bolt B.Rotate blade with cotton swab or pointed tweezers C.Fasten the blade fixture bolt 3.Chang of blade A.Unscrew the blade fixture bolt, and take it down B.Take down the blade with tweezers C.Set up new blade D.Fasten the blade fixture bolt