JMT PCI-E 3.0 x16 1 to 4 Split Card Gen3 PCIe-Bifurcation x16 to x4x4x4x4 Expansion Card 20.2mm Spaced Slots SATA Power Supply Port

The SATA power port got dislocated as I was connecting the power cable.

You never know when you need an insane solution to a motherboard’s short comings.

Product works fine. However, there is an engineering flaw. The adaptor PCIe part that connects to the motherboard PCIe x16 slot is too short. It make the adaptor leaning a little bit which in some cases cause a short on the motherboard as reported by some users. The adaptor MUST be horizontal to the motherboard's PCIe slot. The only way to fix it is to remove the lock clip on the motherboards's PCIe x16 slot. Be very careful when attempting to remove the clip as it may break. I've used a Philips screw driver and gently pushed in the clip hole to make the clip legs going outward. Please have a look at the pictures and you will understand what I mean by the adaptor leaning. Obviously, green is good and red is bad. Green is after removing the clip.

Passt nicht für supermicro boards

Very useful card and works as expected. I used a riser cable to mount this card above my CPU cooler. Be careful with the SATA power connectors: the mounts are not soldered or well secured, so it is really easy to break them off. I used two layers of glue to carefully secure them in place and that helped the rigidity a lot.