MryitcalButton Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Making Supplies, Badge Button Machine for DIY Photo Badge, Party Favors

Q: Is it convenient to change the mold?

Yes,there is a video of changing the mold for your reference

Q: How do you put machine together

see the video. Use a little more pressure on the second press, preferably twice. If the molds do not join together on the second press, the button will not seal

Q: Q: These are 2 of the bad ones that didn't attach to the back when I pressed. How to avoid it?

Answer: 1: Make sure there are no problems with the installation. If something goes wrong with the installation, all subsequent steps will fail. 2: One of the most common causes is that your paper is too thick or too thin.We recommend using 24-28 pound copier paper. 3: wrong circle graphics.Your graphic has to be cut exact and even. It should not be bigger than the mylar and the edges need to be nice and even. 4: You need to push the handle down with a bit of force in the last press. It is best to hold the handle tightly with your hands when pressing for the last time, so that the upper and lower molds can be tightly combined with each other. 5: The top die may become loose after a long time of use. If the mold is loose, that's maybe the cause you failed pressing. Because the vertical force between the upper and lower molds cannot be applied when pressing. Tighten with an L wrench before installing the upper mold if it needs(Do not over tighten, make sure the upper die can rotate properly) 6. Don't forget to put the metal pin that holds the sliding mold fixing. If there is no metal pin, the force of the upper and lower molds will not be uniform, which will cause the button unsealed. Metal pins are easy to lose, so we've included a few extra for emergencies 7. Only put one piece of paper and mylar at a time, too thick material can cause jamming and seal failure. Since papers or mylars are easy to stick together, you may not notice how many layers are there when putting

Q: why the left side isn't crimping and lifting up the paper, front metal piece and mylar?

When crimping the left side, the pegs of the top die should not go into the holes. but when crimping the right side pieces, the pegs on the top die need to go into the holes

4.5/5

معرّف المنتج: 606408876

معاملة آمنة

التفاصيل

Brand
Mryitcal
Color
Purple
Item dimensions L x W x H
11.81 x 9.45 x
Material
Metal
Size
Purple-300

يُشترى معًا بشكل متكرر

Mryitcal Button Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Kit W/300 Sets Metal Pinback Button Making Supplies,Pin Badge Machine for DIY Photo Badge, Party Favors

Button Maker Keychains Supplies, 200 Pcs 58mm Pin Maker Set, Metal Button Maker Supplies with Metal Shell Cover, Transparent Film & Chain Head

الوصف

MryitcalButton Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Making Supplies, Badge Button Machine for DIY Photo Badge, Party Favors

لديك سؤال؟ انظر ماذا طلب الآخرون

Is it convenient to change the mold?

How do you put machine together

Q: These are 2 of the bad ones that didn't attach to the back when I pressed. How to avoid it?

why the left side isn't crimping and lifting up the paper, front metal piece and mylar?

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

سوریش ك.

مندهش جدًا من الجودة وسرعة التوصيل. سأقوم بالتسوق هنا مرة أخرى.

منذ 4 أيام

علي ح.

شحن سريع وتغليف ممتاز. أداة ليثيرمان تبدو فاخرة ومتينة للغاية.

منذ يوم واحد

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

E£ 48442

الرسوم والضرائب مشمولة

EGYPTمتجر

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية

معاملة آمنة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

سنيها ت.

وصل المنتج في حالة ممتازة. خدمة رائعة بشكل عام.

منذ شهر

زينب ن.

خدمة رائعة جدًا. كان الشحن أسرع من المتوقع.

منذ أسبوع

عرض جميع مراجعات ترست بايلوت

معلومات عنا

خدمات العملاء

دعم العملاء

الوصول الإقليمي

القانونية والسياسات

اجتماعي

احصل على التطبيق

MryitcalButton Maker Machine Multiple Sizes, 1''+1.25''+2.25'' Pin Maker Button Press Machine W/300 Sets Metal Pinback Button Making Supplies, Badge Button Machine for DIY Photo Badge, Party Favors

التفاصيل

الوصف

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة