YOOPAI 3D Printer Enclosure, Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/Ender 3 Pro/Ender 3V2/Ender 3 S1/ For Anycubic Elegoo Printers, 29.5×25.6×21.6"

This enclosure worked great and exactly as it stated. I used it with my Ender 3 v2 and it fit perfectly. Super easy to put together and the zippers are high quality, metal zipper with metal teeth and material is a heavy nylon. I used the enclosure on a 70hr print and there was no issues, there is plenty of room so the printer will not touch the enclosure or the enclosure will not compromise a print by getting in the way of the moving parts of the printer. The enclosure does great at keep the printer at a constant temp even when there is a temperature change in the room from wind blowing through windows or A air conditioner blowing threw vents and fans running. when printing with ABS you want that constant temp without any drafts or dust effecting the print and the enclosure does just that, Plus is nice because it will keep dust from the printer when you are not printing, which isn't that often lol. I'm thinking I might have to get some more of these enclosures to put on my other 3d printers!

This is perfect! Not only does the enclosure feel premium, but it was extremely easy to build, and it didn't affect any printing! The size was so big that I had enough room to fit a PLA 1kg spool on the top (I use an Ankermake M5C)! The fan blows with a decent amount of power, and before I ever used this "Fumehood," the particles let off by my printer kept clogging my throat! After I used it, I could sit by this all day if I had to!

Great enclosure, works perfectly and assembly took only 10 minutes.

This is really big. I didn't think that it would be this big, but my Ender 3v3se fits. Be sure to take measurements. Seems well made. internal structure is plastic tubing with plastic connectors. That would explain the price. Zippers are nice, and cord holes are well made. When the printer is in it, door closed and zipped, the inside temp can get upwards of 95deg. Not bad. Definitely helps with adhesion. As for sound, you can still hear it throughout the house. But it is canvas so... I never realized how much the pla smells wen printing. But, now when I open the zipper I can definitely smell it. so it helps with odor. All in all, not a bad price and it keeps everything nice and neat and warm. I like it.

This actually works as intended and looks cool. I mounted an LED strip on the inside (can’t remember if it came with that) and it looks pretty cool in my workshop.

My home has no climate control other than wall heat, so when our lengthy rainy season hits, the indoor humidity goes up. 45-51% indoors on average. Even small PLA prints stopped sticking to a PEI build plate. Running the machine inside this enclosure (Ender 3 with a top mounted Sunlu S1 dryer- 29.25" tall, but they fit) dropped the humidity around the machine by 20-25%, and 4 small dessicant pots sitting inside dropped it even more. The air envelope around the machine is now 98°f, and 14% relative humidity. Couldn't have hoped for better results. Be aware, these are very large, and will require a surface about 30" deep to sit on as the internal frame isn't really strong enough to allow the front end to hang off in space unsupported. Take care in assembling the frame. Make sure the mid span connections are fully seated, as are the corners. Make sure you are pushing exactly straight, compare the length of assembled spars, and candle the corners with a flashlight to check that they are fully seated. Uneven pressure could break the couplings, and even drive the fiberglass rod into you if it were to break. The fabric cover is a very snug fit, but it needs to be. Work it over from rear bottom edge to rear top edge, then bottom front, and finally roll the top corners on. It'll seem almost too tight until you finally roll those top corners on. Also, since you'll have it fully unzipped, try not to trap your zip tabs behind the rear part of the frame. These work really well to stabilize the envelope around your machine, at a good price.

I got this enclosure so I could branch out from PLA and start printing with materials like ASA and ABS without concern for warping or structural defects. It fits my Ender 3 Pro perfectly including a reel of filament mounted on top of the printer and all the little accessories I printed for it along the way like a tool holder and a filament guide arm. All of it enclosed with no problem inside the tent. The AC power cord goes right through the little opening, which is in the correct location for Ender 3 Pro (bottom right back). The tent was easy to set up without tools. You only have to push the rods together like Tinker Toys and fit the structure inside the tent material. It all comes right apart and folds up just as easily. The tent feels very durable and good quality overall. My first print with ASA went very well using this enclosure. The tent contained the heat and the smell very well.

I had originally rated this as a one star while I was assembling it but have changed it to a three star after actually using the product. The instructions are beyond terrible and the support rods require gloves or else you'll get fiberglass splinters during assembly. The good: -Cheap, -Does what it advertises. -Using an exhaust tube that leads outside lets me have this in the room with me as it prints with no ill effects that I can detect even after hour long prints. The bad: -Horrible instructions. If you do not firmly insert the rods into the connectors with lots of force, it is literally impossible to assemble this. This is not mentioned anywhere in the instructions and I had to read other Amazon reviews to find it. -Questionable tolerances. You have to bend the fiberglass poles a bit to get it to fit the cover. While mine wasn't too bad, I had no idea that you had to do this. Another strike against the horrible instructions. -Shoddy support rods. Wear gloves when you assemble this. I did not and I got two fiberglass splinters in both of my fingers that worked themselves out over the next 24 hours but was quite painful while I had them.

Very easy to setup, has just enough room for the ender 3 pro with a 1 kg spool mounted up top. Does a good job at holding the heat in.

Muy buenas para cualquiera que quiera mantener su impresora libre de polvo, ademas que te permitirá imprimir con mayor facilidad materiales que requieren mantener una sistema cerrado como el filamento ABS. Son muy fáciles de armar, lo único es que si ocupa bastante espacio de tu área de trabajo ya que son muy grandes. En general creo que fue una excelente compra!

Item received as described. Very happy.

Super

Llegó todo completo, la instalación es muy sencilla, y a pesar de lo grande, es estable. Muy recomendable