Oceansouth Classic Boat T Top (67" Length x Width 48") (Black)

Installed on a Grumman 5.0. Works very well. I wasn’t sure about how sturdy it would be to hold onto or while trailering but it has been well used this summer on about 10 fishing trips driving 30-60 minutes each way .The install may take some customization work to fit your specific console depending on the size/shape. I ended up chopping off about one inch of the bottom of the legs so as to get the cross bar to mount better with my console. Not necessarily needed but it fits perfectly now.Fishing the rope for the canopy through all the holes is time consuming because it has to be fed one hole at a time and pulled all the way through so the rope doesn’t get all twisted up due to its braid. The rope is almost twice as long as it needs to be so this takes awhile.One word of caution: be careful when screwing in the stainless steel screws - they are not as strong as plain steel and often the heads can snap off if you power them in. This is not just their screws, I work with stainless a lot and this is common for all SS hardware.All in all it’s a good value for a functional and pretty sturdy T top. Guys hold onto it when we are driving across a decent chop on the lakes and it shows no signs of wear and tear.

A bit flimsy but works well. Have had it on for about a month now and nothing broken

I wanted a T Top for my 198 Carolina Skiff but really didn't want to spend 1000-1200 for one. I figured I'd give this a try for the price if it didn't make it I wasn't out much. Turns out it is a pretty well built and sturdy top. I was concerned about trailering it since my closest lake is about an hour and I take atleast one trip to the beach for a week and thats about 3 1/2 hr. It actually did great trailering at 65-70 mph it only has a slight wobble. Fairly easy to assemble, probably the worst part was weaving the rope through the canvas and getting it tight and even. We have held onto it through rough Chop and was sturdy. I think I am going to add 2 more supports to my console just to stiffen it a bit more but really not needed. Make sure to get your mounts as high and wide on the console as you can this will stiffen it even more.

I assembled this in 30 minutes and it was on the boat in another 20. This is a no brainer if you need a t top for your boat. You do need a drill and a drill bit. Also I used a plumbing pipe cutter to cut the cross piece for the width but you could use a hacksaw or Sawzall too. There is only one cut necessary to adjust the width of the entire top. This is incredibly easy to install and it looks great. I wish I had known about this years ago! Great product.

Not sturdy at all needs more braces afraid bot won’t even make it to the ramp before it fails

Looks nice, easy install

This top is a good buy for the money. I didn’t install it in the recommended way. I used more supports to attach it. It is solid and reasonably sturdy.

Pretty easy to assemble. I think it added valve to my boat project on a budget and I didn't have to spend a lot for a t top