K66

PC Specs:9800 X3D + Thermalright Peerless Assassin 120 MINI, Gigabyte b850i Aorus pro, 48GB DDR5 6000 CL30, 1TB + 2TB NVME's, MSI RTX 5070 2X SHADOW, Corsair SF750, Noctua FansPros:SGPC gives you everything you need to build in this case. Not only that, they give you everything pre-organized in a little screw case. They give you a screwdriver and a cute little panda magnet too. Instructions seem good (I didnt read them). Solid build quality. The case itself came packaged nicely and free of damage.Cons:Dust filters came unstuck. They are held on with double sided tape. I actually ended up ripping the bottom one off for better airflow to the video card. Power Plug in a tough spot and the cable is a pain to hide.Tips:1. I could not fit the Video card in this case without modifying the I/O Shield. I took a bolt cutter and just snipped off the corner of the shield (see picture) Once I did that it fell in place with no issues. I put a little felt pad under the card to raise it slightly so the fans don't get so much turbulence from being so close to the bottom of the case. It worked and it cut the fan noise down.2. UNDERVOLT UNDERVOLT UNDERVOLT. Not a suggestion a requirement. See my screenshot from cyberpunk 2077 at max settings 1440p after an hour of playing. I am super satisfied with the fan noise and temps. The Thermalright Peerless Assassin Mini 120 combined with noctua fans is a great combo too.3. Install everything on the motherboard first before you screw it to the case. This is non negotiable. You cant get to anything once its all buttoned up. I will cry on the day I have to replace one of my NVME's.Other Thoughts:This has been my favorite case to build in. Its challenging but once its done it looks great and its so tiny. I think it looks great on my desk. Also Panda Magnet. 5/5 would panda again.

Laptop of 3 years failed, pulled parts because memory is expensive these days...Wanted a small desktop that doesn't flag at TSA or require check-in luggage.Swapped tempered glass with an acrylic window and replaced the power plug extension...er.Little 3D print here, some spray paint there, and all your dreams (mostly) comes true.MINISFORUM BD895i (Ryzen 9 8945HX)TEAMGROUP M.2 2TB (x2)TEAMGROUP SODIMM DDR5 32GB (x2)CORSAIR SF850 Full Modular SFXGALAX 5070Ti 1-Click OC 2XSmall size fits in a generic carry-on lunchbox when traveling.Simple, solid quality construction, "the design is very human".Great venting... holes for cooling; current build is quiet, fans idle often.Nice that the manufacturer packaged extra hardware and brackets.Case fan provided is adorable with the cute little package and brand sticker.Design is flexible, brand is thoughtful, and its reasonably priced.I really enjoyed building on this platform.5/5 Stars, exceeds all expectations.

La correa no se ve como en las fotos del equipo, es más sencilla y se daña fácil. los tornillos son de mala calidad, por lo demás bien

This case is really nice for its price and comes with everything you need along with easy to understand instructions. The white steel paint quality is really good and comes with extra screws for everything, even comes with white thumbscrew and silver thumbscrew options for the glass panel. The included 92mm fan is ARGB and also comes with a full sized phillips screwdriver. Everything is packaged well and was delivered fast without any issues.Was kind of hard to find many reviews of this case, but coming from using a SSUPD Meshlicious, Lian Li Dan A4-H2O and Louqe Ghost S1 MKIII, this was a pleasant surprise and a nice setup that keeps a reference layout with plenty of air cooling options. 10/10 would recommend this case to anyone looking for a similar setup!

The case is perfectly sized, very dense when loaded up and one of the only cases that gives you a decent sized GPU, cooler, and PSU. Keeps everything quite cool as well while being pretty quiet. I have a Thermalright Peerless Assassin 120 Mini cooling my R9 5900x, and it works perfectly! Love the aesthetic as well!

Took a bit of testing but got everything in there nice and clean with good thermals. Really love this case and size. I wish I could be sponsored to build computers just so I could build another.haha

Best looking itx case of this size. There are a few quality things like metal being bent or screw holes right on the edge of metal, but still a great case.

Its a very nice looking case with room for a midsize GPU and cpu cooler height <135mm.

For a case of this price point the metal is very flimsy and the design is very flawed,the two biggest flaws being, one the psu mounting is beyond terrible I had to resort to double sided tape, and two, instead of the psu plug being in the standard spot for cases of this size, it is instead put in an awkward position near the gpu.

Gutes und vor allem kleines Case. Bei mir ists n ryzen 9, rtx 5060 single geworden, mit etwas Geduldt bekommt man alles sehr gut unter, habe sogar einen lüfter und eine ssd mehr unter gekommen.

なんとなくひとめぼれで購入してしまいました。フルハイトグラボが使えるケースでしたら、最小クラスに入るのではないでしょうか？？（当方はゲームとは現在全く縁が有りませんが。。。）ちっちゃくて見栄えも良くていい感じで購入して良かったです。ただし以下の点には注意が必要です。・オレンジの取っ手を付ける場合には仕様が変わったのか　トップのネット部分に自分で2つ穴をあけないと付きません。ネジ等の部品はついて来ます。・LEDランプ等が一切ないデザインです。　意図されて付けられてないのかどうかわかりませんが、　ランプ類が有りません。。。光るファンとかでない場合、　電源のON、OFFが判りづらいです。。。　そこで私はアマゾンさんで売っていたLED付のスイッチ(12mm)に交換してみました。　基板をカットしないと付かないため全くおススメできませんが、、、　ご参考になれば幸いです。（写真ご参照）・CPUファンが大きい場合、背面の9cmファンはスペースの関係から、　薄型のモノでないと付かないかもしれませんです。（写真の通りです）いろいろ書いてしまいましたがちょっと手を入れれば、パソコンはこれ一台で事足りそうなケースじゃないかなあと感じました。今後の耐久性に期待しております。ちなみに現在の構成です。CPU：AMD Ryzen 5 5600GTクーラー：ID-COOLING IS-55　MB：Gigabyte A520I ACメモリ：Crucial DDR4 8GBｘ2SSD：Crucial P310 1TB電源：ウチにあった300WのSFX電源

This case demonstrates how a bad design ruin the user experience. It won’t allow you to take off the front and top panel, making the cable management process a nightmare…

La spedizione è stata con grande anticipo, amazon semplicemente impeccabile!È buffo perché mi ritrovo il PC montato per metà sopra la scrivania fuori dal case dato che lo aspettavo per metà settimana 😂Nota che il pannello in vetro nella foto è ancora con la pellicola protettiva (per questo appare opaco in foto!).Il case è arrivato dentro uno scatolo Amazon e all'interno della confezione del produttore, quindi un Packaging veramente solido.Le caratteristiche del case in questione le conosciamo tutti, ho trovato una ventola ARGB aggiuntiva.Non so se c è altro all'interno della confezione, aggiornerò eventualmente la recensione!Intanto 5 stelle, servizio veramente impeccabile!Update: sorprendentemente il manuale ha più di cinque lingue tra queste l'italiano! Qualcuno lo darà per scontato Io non me l'aspettavo completamente! Ottimo!È un case molto piccolo naturalmente e i componenti entrano davvero con margini che rasentano il mezzo centimetro.Molto solido, non è quel genere di metallo che si piega con poca pressione. Ha un airflow incredibile per le sue dimensioni. È dotato di pannelli MESH con un piccolo adesivo (Io sto pensando di fissarli in modo alternativo ma è una mia scelta). Anche il pannello di vetro Può essere distanziato tramite degli appositi distanziatori per aumentare il flusso d'aria Inoltre sorprendentemente possibili istallare anche dissipatori a liquido AIO!Dentro la scatola c'è praticamente tutto a partire dai piedini del case, i gommini, persino il giravite! Le istruzioni anche in italiano è estremamente semplici come pensare ad un'azienda molto attenta ai dettagli.Le 5 Stelle sono assolutamente confermate.