4 Pcs Drop Down Hinges, Cabinet Lid Stay Folding Hinges, 180 Degree Lid Support Flap HingesSoft Close Furniture Kitchen Cabinet Cupboard Wardrobe Door Hinge, with Screws

Fantastic, relatively simple to fit, works perfectly

I bought these support hinges for a TV cabinet that has a drop-down door at the front. The Amazon description stated as follows: Wide Application: Suitable for making furniture that flips, pulls down to open, and pulls up to open/close. I doubted that the same hinge would give damping for both drop-down and hinge-up doors, so I was prepared for the worst. Sure enough, when they arrived they provided soft-close for hinge-up doors only. So if you have a door that opens upwards, these hinges should work just fine out of the box. However, I needed soft-open for drop-down doors. As they were so cheap I decided to see if they can be modified to work for drop-down doors. And sure-enough, they can do so, with a very simple two minute job. Anyone with a modicum of common sense can do this but it will void any warranty, so please do this at your own risk. Place the hinge flat on a table with the Allen key bolt facing up, Undo the bolt with the key provided and swap the arm on the left over to the right hand side. So, the left arm is now the right arm! This reverses the resistance and enables you to use these hinges with a drop-down door. Please note there are some small pieces in the circular centre of hinge ( six small metal bearings/rollers) which will become loose in this process, so be ready to catch them and pop them back in (a pair of tweezers might help but I didn't need them myself). It's really very simple to do. Just take your time and with a little care anyone should be able to do it. Make sure all the pieces are aligned properly and re-tighten the Allen Bolt. They now work perfectly, providing good damping on a drop-down door. As I said, this will void any warranty, so please do this at your own risk. Hope that helps someone out.

Does the job, you do have to adjust them alittle but we only needed 1 hinge per top box. Which was good! As i ordered to per topbox.

A bit basic, needs care to fit just right, and can catch trunk contents occasionally, but works much better than I expected. Good value.

Very good quality 👍

Work well for toy box to keep it safely open - excellent

Used to hold open on overhead kitchen top box. Zero instructions provided! Used internet diagram to try and work out how to fit. After several trials and errors managed to work it out. However nearly sent item back as it would not stay open. In the end we turned it upside down and it worked. There was no way whatsoever to know which way was up and which was down as bracket looked identical both ways. Used only one bracket as we used the other to try and demystify the mechanism. We loosened the second bracket too much while trying and it fell apart into countless small parts - impossible to put back together. Once fitted, the bracket works well, however would never buy again and do not recommend the product.

Perfect , stops his little fingers getting squished

Funktioniert einwandfrei.

Semplici da montare, ottimo.

Muy buena sujeción de la puerta

Bonne qualité de fabrication, semble durable. Facile à poser.

Ich habe einen Hängeschrank zwecksentfremdet ,die klappen die sonst nach unten aufgehen , gehen jetzt nach oben auf. Mit den Klappenhalter eine sehrschöne Sache, auch das einstellen der Klapphalter mit imbusschlüssel kein Problem.