Metal Watch Band Stainless Steel 16mm 18mm 19mm 20mm 21mm 22mm 24mm Watch Strap Bracele Replacement Bands

No issues with my bands, just a little patients, look and feel good for the price.

The band is a good weight and the finish is beautiful. My only problem with it was that the pins supplied didn’t fit through the holes at the end onF the band. They were too thick. Fortunately I collect watches and I have lots of spare parts. I found pins that fit and I am very happy with the way the band looks on the watch.

Installed a 20-mm strap on a Withings ScanWatch 2 - 42mm. Not exactly the right finish on the stainless (too shiny) for this watch but it will do for now and for the budget I had.My take:1. If you install the strap with the 'straight' ends, then you are good to go. The strap itself is not bad quality. But then again, you have plenty of items for that 'straight' style.2. If you need the 'curved ends' then you are possibly out of luck, as several mentioned. The curved "interface" (as the listing calls it), is not a solid block of steel but rather 'sheet metal'. Not great quality in itself but once installed it actually looks decent enough. The problem is that the pin they give you are too thick for the curved ends. They work for the straight ones but you will have to find your own if you want to install the curved ends. Knocking a star off for this issue (although I did not contact the seller to see if he would provide pins since I had some).

A pain to put onto watch (they all are) but has held up well. I bought a year ago and have used every since.

The video shows removing the end links so you can replace them with the curved ends. Very simple to do and they provide the tool to do so. Good.The problem is, even though they provided four spring bars, all of them are too thick to go through the bracelet links, so you can't use the curved ends unless you source thinner spring bars. They're even too thick to go through the curved ends!I'm a watch collector, so I'm sure I'll be able so scrape up a couple that will work, but for the average consumer this is a show stopper if they want to use the curved ends.

I liked the appearance.When fastened to the watch, the end pieces are not well-fitted to the watch bezel. This meds a jeweler or someone with special tools to correct.I wish the band had quick release pins. The pins are difficult to access.

Nice band to swap out the black rubber when not used diving.

Very nice band