[Amazon-developed Certification] Compact by Design

worked very very well, amazing!!

Excellent clean. Works very well.

I use this in my ultra sonic cleaner, heated most times to about 85*. This solution works well on aluminum and also on chrome tools. After cleaning I drain it into a gallon jug and save for my next cleaning episode. I dilute my mixture about 1/3 solution to 2/3 water in the cleaner, but still experimenting with other solutions for money savings.

Works good.

I have only used Tillbrook Ultrasonic Cleaner once on a motorcycle carburetor. The carburetor was very dirty and I precleaned some of the circuits with carburetor cleaner before putting the parts in the ultrasonic cleaner. The results were very good. The brass jets, emulsion tube etc were not shiny but all of the deposits and dirt and were gone and the aluminum parts looked almost new. The motorcycle ran good as new after reassembly. I have used the Chem-Dip carb cleaner in the past and the results with this ultrasonic cleaning solution were at least as good if not better.

HarborFreight 6 liter ultrasonic cleaner. Right out of the box I needed to clean the head and valve guide for a 5hp duel cylinder air compressor I have had for 30 years. I mixed the solution up as instructed 2 cups of product with 1 gallon of water. Set the heat on 170 degree F and watched the magic after 15 minutes. Of course gasket scraping was another issue however, the results speak for themselves. Product has virtually no odor. Does not feel corrosive. Feels like a mild dish soap. After the head was cleaned I plunked in a 53 year old GM A-body door latch that been sitting for a really long time, at least 30 years in my sheed. 15 minutes later you can see the difference. Yes this product works, yes I will purchase again. Stay Safe.

I had doubts based on price but well made and works great. Delivery was supposed to ne about 1 week but came earlier than expected and put to use right away!

been using for mc carbs etc. So far, so good!