SICOTAS Shoe Storage Cabinet, 30 Pairs Rattan Shoe Cabinet Storage for Entryway, 6-Tier 41" Tall Shoe Cabinet Storage, Boho Farmhouse Storage Cabinet with Doors for Entryway Hallway Living Room Closet

Quality: Appropriate for the expected weight load. It will probably not stand up to very heavy loads, for example, stacks of books. But then, this is not intended for books, but shoes, after all.Aesthetics: Although the bulk of it is particle board, it has a pleasing appearance and does not look cheap at all.Design: Very impressive. Good quality for the price.Construction: It does take some time (about 90 mins for me working alone), but the instructions are adequate to follow, step by step.Suggestions on construction:1) Put this together in an open space, with plenty of room to layout the parts, do the prep work on several of them, and to be able to maneuver around the parts, turn it upside down, etc.2) Use one or both of the large flat Styrofoam pieces as support panels while attaching the handles and hinges. Be careful not to lay a prepped panel or piece down on any hardware, which could the hardware to bend or even break out of the wood in which it is seated.3) Rig something soft for the panels to rest on, at exactly 6 inches high, so they are supported while you attach the hinges. I used one of the Styrofoam pieces, plus a 5-inch box. Put all 8 screws in for both hinges on a panel just tight enough to hold the panel from moving away from its supporting part, however, still allowing for fine-tuning its positioning. Then gently lift up the far edge of the panel wiht one hand so it is level while you tighten the 4 outer screws on the hinges with the other hand. Then tighten the 4 inner screws and test that the panel is level, closing flat. Finally, adjust the middle screw of each hinge to offset the panel our or in from its support so it sits exactly where it belongs when it is closed.4) It was hard for me to figure out at first, but the brackets ("L" in my kit, which is appropriate, since they are "L" brackets) are meant to optionally attach the piece to the wall behind it, for stability. they sit with their open slot along the open areas of the backing. There are two of them, and they allow for nearly two inches of range for the exact locations for such wall-anchoring.5) It was clear to me how the "L" brackets attached after I reached the end and saw how they worked, so it is a good idea to read through the instructions first.6) Tools needed: I used a Phillips screwdriver, a soft rubber mallet, and a cordless screwdriver. I would NOT recommend using a power drill, as it would be too easy to overpower the particle board and make a real mess of this build. Even using the cordless screwdriver, I had to be careful not to overtighten, but generally started with that, then drove the final tightness with the screwdriver by hand, being very careful not to over-tighten. Just snug (a "light" hand tight) was sufficient.The cordless screwdriver was most useful in installing the 16 screws into the plastic supports in the back, where it definitely saved some time.The mallet I used to gently seat the top and sides, which needed some "gentle persuasion" as the fit was very tight there and also to make sure the supports were fully seated before installing the shelves.

Love this shoe storage! The perfect fit for my home entry way. It was easy to build as long as you follow the instructions. I’ve gotten many compliments on it. It’s beautiful and holds a lot of shoes! And it’s a great quality, not flimsy at all.

Great quality and easy to put together. The cabinet looks very nice and is very spacious.

Love this piece. Yes, it took me a couple hours to put together, but mostly because I was making sure I didn’t screw up. I’m not great at putting furniture together. Directions were pretty straight forward. This company gets a gold star for extra effort of posting a YouTube video to show you how to fix the doors if they didn’t turn out straight. It was a very easy, very quick fix. Truly couldn’t recommend this more!

Great quality. Much more sturdy than I anticipated. Took me about 2-3 hours to build by myself. It’s super cute and I ended up using it in my office.

Cute and practical entry way/shoe cabinet. Instruction is easy to follow. I would recommend it!

It’s very pretty! As long as you line the edges properly, its sturdy. I have a women’s 6.5 and it can fit 4 pairs of shoes in a row. However, my husband is a size 13, and can only fit 3 pairs in a row, so keep that in mind. Aside from that, I absolutely love it and it really elevates our space

Very good quality, easy to assemble, looks great in the interior