SlipX Solutions Microban-Infused Square Adhesive Anti-Slip Safety Treads, Reliable Grip for Bathtubs, Showers, Stairs & More, Power Grip Floor Grips (42 Count, Clear) Design Your Own Pattern

6/26/18 Followed the prep instructions; scrubbed the tub, rinsed it well, then alcohol and let dry. Installation was fairly easy. Just lay out your pattern first, then apply similar to a screen protector, working the air outward. For the small solid square, I pressed in the center, making a circle that I widened until reaching the outer edge. For the open squares, I traced my fingertip around the inner edge first, then used the larger pad of my thumb to go around again, pressing the air outward. This method worked well for me. I appreciate that these are somewhat translucent so you can see any trapped air bubbles. When this occurred, I raised just the edge with my fingernail and then worked the bubble out. Can't speak to the longevity of the product yet but will update if they fail. I don't expect them to last forever, hopefully long enough to make them worthwhile. UPDATE 9/4/18 These are still holding up just fine. No discoloration, no peeling. UPDATE 5/25/19 Almost a year after application, these are still holding strong, no peeling or discoloration. UPDATE 4/15/21 *Finally* two have come loose and a few others are starting to lift at the edges. These did their job of providing traction AND held remarkably well for almost 3 years. Worth the price, will definitely buy more.

I brought these to replace those mats because the mats was a hassle and just not great in my tub and these were just what I needed. They look like art in the tub, but most importantly they work no slipping or sliding while bathing.

These traction stickers have held up fairly well in the bathtub. I bought a set of these in December 2019. We have a fiberglass tub/shower surround and the tub floor is the slickest I've ever encountered. Before installing the tread stickers, I cleaned the tub very well with degreaser and rubbing alcohol and let the tub dry completely. We did not use the shower/tub for 1-2 days after installing the stickers. The hardest part about installing them was laying out a pattern that we liked. But in my opinion they do look nicer than many of the other options. In mid 2020 we had a baby, so the tread stickers have been subjected to lots of baths and showers. Around the 3 year mark, a few of the stickers came off where one would typically stand while showering. We made due with the ones that were left, but another large sticker just came off, so I'm purchasing another pack to replace the missing ones. The stickers closer to the front and rear of the tub that don't get stood on as much are still in place.I wish the treads with the heaviest use would've stuck longer, but the majority of them are still there after close to 4 years of daily wear and tear. I don't think I could've prepped the surface any better. The remaining tread stickers still look nice and haven't gotten dirty or worn looking. I don't have another brand or type to compare them to since these are the only ones I've ever used. Considering the price and that they lasted at least 3 years, I'm purchasing them again.

The condo I bought years ago has a tub from the '80s, with that super slick porcelain finish that even for those who are as sure footed as a mountain goat, end up slipping and sliding around. The final straw for me was trying to climb out of the tub, my foot slipping and leaving a huge bruise up my shin where my leg smacked against the side so hard, I could have sworn I broke something. I knew I did not want a rubberized bathmat, they are a pain in the rear end and usually end up stinky and you still slide about if they don't suction down properly, so I went looking for rubberized bath treads that had some sort of style. Here these were! Not the yellow fish or ducks my parents had in the tub, while I grew up in the '70's but something modern and stylish looking, that didn't scream a old klutz lives here! So, I bit the bullet and picked up a pack and I am so glad I did. Having read the reviews of people who had issues with them staying stuck down, I wanted to make sure these were going no where.So here is what I did:First I scoured the tub with comet and a 3M scrubby (old sink sponge) not once but twiceThen I rinsed it until I could run my finger along the bottom and not feel an ounce of grit, took about a good 3 to 5 minutes.Then the hard part... I left my tub alone as I had scrubbed it after my morning shower on Friday, I didn't touch it until after Noon on Saturday. I wanted to make sure that in our California heat, my tub would be ultra dry.Next all I needed to do was lay out the treads in a pattern I likedNow came the fun.. STICKER TIME! I applied each tread individually and once it was stuck down where I wanted it, I used my fingers to really work the air bubbles out.Now the next hardest part... LEAVE THE TUB ALONE! No showers, no baths nothing for 16 hours.. yes I needed a shower by Sunday but it was so worth it!Then on Sunday I tested them out... Took a much needed shower, low and behold the treads stayed stuck down!Now as I write my review of these treads a month after receiving them and using them once to twice a day, plus weekends (Lots of showers in this house) they have remained stuck on tub floor and I haven't had a slippage problem since then!Pros:Non SlipEasy to InstallEasy to MaintainCons:None that I've experiencedIf you have an issue with a slippery tub and you too are afraid you might break your neck, then spend the $7 dollars, take the time to properly install these beauties and you too will enjoy a slip free shower experience!

Not sure how else to put it. The adhesive does not work at all. Followed the instructions down to the T. Clean surface, rub down with alcohol, let the tub dry and then press adhesives down for 12 hours. This morning I take a shower and all of the adhesives came off the tub. I can’t get a refund because the product was used . Not great quality at all

Terrible.came off after a week.asked for refund.

We bought these in March of '22 for $9.99. I was tired of washing bathtub mats (those damn suction cup thingies on the bottom, gah!). I prepped the tub base by first washing it very well, then drying it, then applying alcohol (the rubbing kind, not wine). Then drying thoroughly - basically followed the instructions to the letter. Didn't use the tub for at least 24 hrs after application. We don't have baths in this tub, but shower regularly AND our dog jumps in to get her feet washed every now and then. No sign of peeling whatsoever. I'm honestly surprised. They may not be the prettiest solution, but they are inexpensive and do the job. I clean them using one of those long-handled soft-bristled dish scrubber things, using vinegar and water or just dish soap (haven't used harsh chemicals). I would definitely recommend these, as long as you apply them properly.

I really wish I had bought these ages ago instead of the countless bath mats I went through trying to get one that I felt was secure enough for me and my son to get in and out of without it suddenly slipping away. Couldn't praise these enough put them down left them over night and first try no problems even covered in soap they still grip to your feet. Worry free shower times for me and my son eventually!! Many many thanks.

For my second purchase, I bought a bigger pack because they do come off after awhile, especially if you have water draining issues in your tub like we do.

After washing the tub and cleaningit dry I added these.(waited a day then showered)The ones near the bottom of the shower head were sliding off quickly. The rest stayed on.