VLB 500 Universal Speaker Wall Mount Set Swivels up to 180º (Left/Right) Can be Tilted up to 20º Pre-Assembled Max. 11 lbs (5 kg) Black 2 mounts

These speaker mounts worked out well for my two surround sound speakers. And they were easy to install.

The speaker mounts work as advertised, are pretty inexpensive, and aren't difficult to set up. What more do you need?These are not designed to handle very heavy speakers, but for smallish surround speakers they're a great option. If you are moderately handy you won't need instructions, as it's pretty intuitive how they work. Great option for a quick and easy rear speaker mount.

Easy to install, however, I needed to buy smaller screws as screws that came with the "universal" kit were too large in diameter. Both my rear vizio and LG speakers required 3.5mm which equated to #6 size screws that were 3/4 an inch in length. I also used a bolt to take up a little of the slack as well as keep the screw from pushing through as it has a small head. This worked perfectly. The only thing is that the mount is all plastic and the round hinge is being head in space by one screw. If I reposition this speaker to many times by moving the speaker around, I can see the plastic wearing around the screw and eventually giving out. Still, this is the only product I found that can do what u wanted it to do which is a 360 movement that were compatible with my speakers (after some supplemental screws/bolts). If they at least includes the smaller diameter screws, I would call this truly universal.

Wonderful low-profile speaker mounts for my vizio sb36512-f6 satellite rear speakers. The only problem is that the included mounting hardware didn't have the right size screws for the hole in the back of the speakers; I just went to a nearby ace hardware and picked up 2 m4-16 screws and those worked perfectly.

The wall mount had good points and bad. It was sturdy enough to hold my 18lb speakers but there was a trade off. The mounts don't protrude very far off the wall making a downward tilt challenging. This will be an issue with vertical speakers. I believe this was needed to enable the mounts to handle more weight. The assembly was complicated by the fact that the nut at the bottom of the mount isn't held in. Two hands are required to attach the speaker bracket to the mount with very little room between the speaker and the wall. Challenging but doable. You may want try a piece of tape to hold the nut in place. All in all very good quality and a good buy if it fits your mounting requirements.

These mounts do not seem very sturdy, but they’re the only mounts that worked with my Sony SARS3S surrounds. I tried to mounts before, and they would not work with the correct screws for the back of the speakers.

great product

Nice little mount. One part mounts to the speaker, the other to the wall, then connect the ball/swivel together,(that part is a little tricky if you're up on a ladder with the speaker in one hand)aim, tighten and you're done. Very nice cosmetically.

Installed Samsung speakers on the wall with these brackets. They came with various sizes and lengths of machine thread bolts to attach to the speakers and the correct thread pitch and length were there for the Samsung. I located and mounted on wall studs so installation is very secure. If I were installing on just drywall I would be using a good strong anchor purchased at the local hardware store.

Supporti per casse audio di buona qualità. Le plastiche sono resistenti e supportano bene pesi e stress da chiusura. Facile da Regolare. io le ho utilizzate per il soggiorno e fanno una bella figura.

Preis Leistung Super. Macht ein sehr guten Eindruck. Einfache montage. Alles bestens. Sehr zufrieden damit.

Goede Kwaliteit beugels voor mijn Samsung stelliett soundbars

Passade perfekt. Lätt att installera