MENSI Electronic Double Ignition Igniter Kit, 450mm Length High Spark Plug Wire Per Piece, Compatible with Commercial Catering Equipment Stove

Bought this and added it to a single jet burner. Much better than using a lighter. I came through the heat shield from the bottom and let the probes run up past the burner inside the tube. I bent the two prongs a bit father apart so they would have a bit bigger arc. Seems to work well with propane turned down low.

I just installed this in a gas fireplace where I previously had been turning on a gas valve nearby and then rushing with a butane handheld lighter to ignite the gas before too much built up to a minor explosion. It was very easy to route wiring underneath the glass fireplace frame and position to ignite the burner. Since I have not used this long, I cannot address its durability yet, but will update review if it fails. User might consider loosely wrap the insulated leads with heavy foil or other heat shielding as the stated max temp is only 200 degrees. One possible downside is that those leads could be six inches longer, but it worked fine for my setup.

I ordered this on a recommendation for a lighter for a Holland Grill. The grill had to be modified a bit but once complete, it works great! The igniter gives plenty of spark and the wires that supply the voltage between the two ends is heavy duty. Whatever the need, I would recommend this system.

This has nice strong spark and installs very easily.

Our lighter starter finally took a dump, so I have been using a long lighter to get it to start. "SCARY" as you never know when it's going to light. So we bought this replacement and it works great, Wasn't that hard to put in. Recommend

Had to do a bit of retro fitting. Nothing to do with the product just the grill itself. Worked great and would purchase again.

I like the quality and operation of the product was flawless. I used it for an ignition device on my "NewFire" Vaporization Oil Burner and wood burner. Those are a series of inventions using my "Controlled Internal Combustion Reactor" technology and I use the igniter for the propane ignition both devices use for preheating

Product work but it didn't work for my application I wanted to use it for It was too big but it seemed like it was good quality and it sparked but not very big

alles bestens

Pop a 1.5v AA battery in and you have effortless sparks to ignite your grill. Worked perfectly first try.

Super sicher. Klare Kaufempfehlung

Works great to start propane stove, did not tried yet for any long period of burning the stove yet. Will recommend.

Achtung..... man hat zwar ein Hochvoltkabel verbaut, aber die Stecker sind nur mit Schrumpfschlauch abgesichert. Ich habe sofort ein Stromschlag bekommen.... beim überschlag zündet natürlich die Elektrode nicht......