ELEGOO Mars 4 Resin 3D Printer with 7" 9K Monochrome LCD Display COB UV Light Source and Screen Protector Pringting Size 153mm*77.76mm6*175mm

الوصف

About Brand Vision Create the future, interpreted as "Using programming and 3D printing technology, we can create almost anything - Elegoo offers geeks the key to a new world." Basic Parameters XY resolution: 18*18um [9K 8520*4320] Z-axis accuracy: 0.02mm Layer thickness: 0-0.2 mm Printing time: Max 70 mm/h Power requirements: 100-240V; 50/60Hz; 24V/3A Dimensions: 227mm (L) x 227mm (W) x 438mm (H) Construction Volume: 153mm(L)*77.8mm(W)*175mm(H) Net Weight: 5.5 kg System: EL3D-3.0.1 Technology: MSLA Stereolithography Light source: COB (wavelength 405nm) Slicer Software: Chitu Box & Voxeldance Tango Connectivity: USB Operation: 3.5 inch touch screen Precautions Keep the 3D printer and its accessories out of the reach of children. Fill the resin tank not less than 1/3 of the volume, but do not exceed the MAX line position. Place the printer in a dry environment and protect it from rain and moisture. If you encounter an emergency during operation, first turn off the power supply of the 3D printer. Use the printer indoors and avoid direct sunlight and dusty environment. Use 95% (or higher) ethyl alcohol or isopropyl alcohol to wash your model, unless you use water washable resin. If printing fails, you need to clean the excess cured resin in the resin tank and replace the resin, otherwise it may cause damage to your printer. When using the 3D printer, wear a mask and gloves to avoid direct skin contact with the photopolymer resin. If the release film in the resin tank is white, scratched or has no elasticity, the pressure error rate is high, replace the release film in time.