





Desertcart purchases this item on your behalf and handles shipping, customs, and support to EGYPT.
❄️ Chill in Style, Sip with Pride
The Berlinzo Premium Clear Ice Cube Maker Mold crafts two extra-large 2.1" crystal-clear ice cubes in 48 hours using BPA-free silicone. Designed for slow melting, these cubes keep whiskey and cocktails perfectly chilled without dilution. The flexible mold allows easy ice removal, and the included storage bag preserves freshness and prevents odor absorption. Non-electric and reusable, it’s the ultimate accessory for sophisticated home bartenders seeking flawless presentation and enhanced drink experience.

| ASIN | B092R21Y9Q |
| UPC | 850022410178 |
| おすすめ度 | 5つ星のうち4.4 314 レビュー |
| カラー | クリア |
| ケース形 | 正方形 |
| サイズ | Extra-Large |
| パック数 | 1 |
| ブランド | BERLINZO |
| ブランド名 | BERLINZO |
| メーカー名 | BERLINZO |
| メーカー型番 | B_Par1 |
| モデル名 | C2C_IM |
| ユニット数 | 1 個 |
| 付属コンポーネント | 再利用可能なストレージバッグ。 |
| 品目寸法(L x W x H) | 18.3長さ x 12.4幅 x 19.1高さ cm |
| 商品の入り数 | 1 |
| 商品の寸法 | 18.3長さ x 12.4幅 x 19.1高さ cm |
| 商品の重量 | 1.62 ポンド |
| 商品タイプ名 | 製氷機 |
| 形状 | 正方形 |
| 材質 | シリコーン |
| 素材 | シリコーン |
| 素材タイプフリー | BPAフリー |
| 色 | クリア |
| 食洗機対応 | いいえ |
P**R
Makes great crystal clear ice cubes (two 2" ice cubes in about 30 hours)
The process is a little clunky, and it can sometimes be frustrating but with a little practice and patience, you get beautiful, crystal-clear ice cubes every time. I gave this ice cube maker 5 stars because it is relatively inexpensive for what you get, the materials are high quality with good fit and finish. The drawbacks (such as taking 30 hours to make only 2 ice cubes) are really a function of thermodynamics rather than the product itself. (See the end of this review for the TLDR "how it works".) I have been using this ice maker for around 18 months now and here is the process I use to get crystal-clear cubes every time: 1) Start by cleaning and drying all the parts. If any of the parts are wet when they go into the freezer, the unit can be extremely difficult to open up and can result in the corners of the ice cubes being chipped. Also, if you're refilling the ice maker after using it, make sure there is no residual ice chips or drops left in the mold. 2) Assemble the components. First, make sure the foam insulator is pushed all the way down into the plastic shell and then the plastic reservoir is pushed all the way down into the foam insulator. These parts all fit very nicely together and it will be apparent from the way the lips of each piece connect when they are properly assembled. Leaving a gap between any two of these pieces will result in substandard ice. 3) Fill the reservoir to the indicator mark. I use reverse-osmosis (RO) filtered water but I've also used tap water successfully. Use lukewarm water for best results. 4) Assemble the silicone ice mold and then slowly let it settle into the reservoir. Don't push the mold into the reservoir or you'll end up with incomplete or malformed ice cubes. A small amount of water should bubble up out of the 2 vent holes in the mold. Make sure the mold is completely settled into the reservoir before proceeding - again, the parts fit together nicely so it will be obvious when settling is complete. Use a towel to dry any standing water on top of the ice mold. 5) Use two hands to lift the entire assembly and place it upright in the freezer. Lift it by the side handles. Do not squeeze the assembly (by lifting it with one hand) or you'll end up with incomplete or malformed cubes. The goal here is to have no additional water bubble out of the vent holes as you put the assembly into the freezer. Leave the mould in the freezer for 30 hours. 6) Pull the silicone mold out of the reservoir, pull the two halves apart and gently remove the ice cubes. Cubes can be stored in the included silicone zip-lock bag (the bag holds 6 cubes) for several weeks. Cubes can be stored in regular freezer Ziploc bags for a couple of weeks but longer than that and they start to degrade. Use warm water to remove the ice in the bottom of the reservoir. Dry all the parts and you're ready to start again. How it works: the key to the process is the insulating layer on 4 sides plus the bottom of the mold. The mold orients the cubes with one corner up (the non-insulated side) which is exposed to the ambient air in the freezer. This orientation along with the insulation forces the water in the mould to freeze from the top down. As the water freezes, it pushes the entrained air (and any impurities) down into the reservoir, leaving crystal clear ice behind in each cube. (The reservoir holds about 3x as much water as needed to make the cubes. This extra space give the water with entrained air a place to go as the cubes freeze.) The insulating layer is a bit thin but using warm water in the mould ensures that the process proceeds properly. The whole assembly is kinda bulky and it would be quite a bit bulkier if the insulation was thicker so I think this is a good design trade-off.
T**O
Works perfect. Ice cubes were clear all the way through.
I sort of kind of had my doubts based on experiences from other reviews left here. They were mixed. Some people had great success while others complained it sucked right out of the box. I followed the instructions exactly. Cleaned it well with soap and water first. Rinsed it well and then filled with warm water - not hot, not cold but warm. Froze it for over 24 hours and checked on it. It was so clear that I thought perhaps it hadn't frozen all the way through yet. I took it out and moved it around and didn't notice any air bubbles moving inside of the cube. I went ahead and removed the mold and then pushed the ice cubes out. They were solid and they were crystal clear. The eyes left inside of the bottom of the mold had not Frozen all the way through but even it was clear after the water drained out. This is a quality item and I'm very impressed with how my ice cubes turned out. My only wish is that it included additional silicone stamps for decorating the ice other than just the two that it came with. I highly recommend this and if there is a four-cube version, go for that one as well
A**A
It's works!
T**N
Truly Makes Perfectly Clear Ice Spheres
This truly makes perfectly clear Ice Spheres! Works well, although, you do have to melt a good bit of ice in the bottom of the container before refilling it for another round of ice spheres. Still a very nice product and for the price, it works very well.
K**R
Crystal Clear
Very happy with this ice cube maker. I've made 3 batches (6 cubes total) and all the cubes have come out crystal clear. I did boil the water and let it cool to 100 degrees per the instructions...a bit of a hassle. The next batch I'll try using lukewarm tap water.
Trustpilot
2 months ago
2 months ago