LIBO Stand-alone Door Access Control System Kit Set with 180kg/350lbs Electric Magnetic Lock, DC12V/3A Power Supply, Door Exit Release Button, 10pcs RFID EM ID Keyfobs

Works great keeps the kids out of the food cupboard 👍Easy to wire in and setup.

This is an excellent maglock but should not be used as a security device. I bought it as a gadget and it should not be regarded as anything else. Overall fair quality for the money although the controller/keypad needs to be more robust, it's quite flimsy. THE INSTRUCTIONS ARE DREADFUL!!! Non't attempt to install this unless you are experienced in moderately complex wiring.

The whole system looks good. However, next to impossible to install. I tried and failed, hire electrician to do it (which cost more than the products) without success either because the instruction is not clear, the drawing for the wiring is completely wrong. The coded box and key flop doesn't match, tried to enter the code to reset to factory setting as stated on the manual does not work either.I'm waiting for the seller to get back to me to see whether a replacement for the coded box and key flop or an instruction to show how to set it up properly. The magnetic lock part does work, just the control mechanism doesn't

Thus far I have fitted many of these locks without issue. Today however the maglock did not work, the coil was very poor and had no strength. Voltage checked & is correct but product very poor. I will need to review what products I order again and maybe try a different supplier.

I thought that as this was packaged as a set that it would be...not so. It is three separate products from three different manufacturers. The instructions don't really match up to each other and one of them is only in Chinese. I got it eventually but had to figure the wiring out for myself.

Almost everything was in the box except cable and a box to mount the door release switch. The instructions are a little difficult to follow, but the colour coding helps. I also added a second door release using an old door bell push. The programming is very easy, setting up the tokens and an access code was quick and easy too. The wires for a bell seem to be live all the time, which doesn't seem to make sense, so I couldn't add a door bell to the system. All told, it installed quickly and easily and works really well - and it's as cheap as chips!

I wouldn’t use them for any real security but have 3 installed work fine to limit access in normal circumstances and work as deterrent but wouldn’t use them to prevent burglary as they can be easily forced

Did what it said, no ZL bracket so you will need to order one if you have and internally opening door

Il prodotto in se e per se è buono l'unica pecca sono le istruzioni che non sono di facile lettura.Nessuno fino ad ora a detto che la password che viene fornita di default è solo per la programmazione e nonper l'apertura della porta.Per impostare la vostra password dovete digitare #123456#21(la vostra password)# e dopo digitando (la vostra password)# si aprirà la porta.Stesso discorso vale x le swipe card che non sono programmate, dovete digitare#123456#1 poi avvicinare la swipe card al lettore e digitare di nuovo # a questo punto ogni volta che avvicinerete la card al lettore si aprirà la porta.

A little tricky wiring but works great and we were able to use our existing badges to access!

ombygg brand dörr

Baie garage, nickel

Had it wired up, programmed and tested on the workbench within an hour, worked great. Took some time to apply it into my project and run the wires neatly. My only complaint was the mounting of the magnetic door release into my project took some time and modification but worked out ok in the end. Programming was pretty easy but I do this stuff for a living. I would recommend this item, a great item at a very reasonable price.