Dremel 2200-01 Versa Flame Multi-Function Butane Torch Perfect for Wood Burning, Leather Crafting, Stencil Cutting, Cordless Soldering

This is a very useful tool in professional hands. It lights flawless and refills easily

Lots of extras and a nice case. Works like butter.

Love this tool. As rebuilding of WWII crashed aircraft there's just no end to the needs of instant heat to solder heavy amp connectors to thawing out frozen device to restoring Freewheel on very classic Schwinn bike that saved a fortune simply heating Freewheel and it curred the issue of stuck pawls making Freewheel spin in both directions making it no longer possible to drive the rear wheel. Now because of laps of memory with heating shield in place, I accidently thought heating shield screwed off the tip cs simply slide off causing the tip to tear out the spark lead to fire up the torch. Not sure if I can make the repair myself, but I'd like to see if mfg can help me out with this crisis. Thanks Again for a wonderful tool very nicely made. I purchased bullet proof Pelican 1060 water proof case to keep him in. He deserves it. Cheers

MICRO TORCHES REVIEW I was unable to decide on which of the many butane micro torches I should buy from Amazon, and I couldn’t trust the ad claims or flame pictures, so I ended up buying 4 to test then against each other. I have lots of larger torches of various sizes, but I wanted one with the smallest, most focused flame. The pictures in the ads of the flames was not, where pictured at all, was not useful to me or accurate. Price was not a factor for me in this. 1. Blazer ES1000CR Spitfire https://www.amazon.com/dp/B001EDU5NY Made in Japan. This one has very cumbersome controls. Lighting it is a very awkward process requiring two hands and rolling an interlock forward whole pushing down on a button. Lighting it also requires 3 other controls to be in the right positions. The controls also feel rather flimsy. The flame is OK There is very little variation in the flame between minimum and maximum. It does have a button for continuous operation, but again, it feels rather flimsy. It was also the second most expensive at $53. Really the most expensive when you consider all the extras the $56 Dremel comes with. 2. Bernz-O-Matic ST2200T https://www.amazon.com/dp/B000PS9TQI Made in Taiwan. The listing for this product falsely states, in two places, “The product is manufactured in United States”. I did not appreciate the false/out-of-date information. The controls are much less cumbersome than the Blazer. It has a child lockout for the igniter, presumably brought to us courtesy of CPSC. If you don’t have kids and want to get rid of this, it looks like it would be very easy to just snap off a piece of plastic and be done with it. The torch is easy to use. There is not much difference between the minimum and maximum flames. The flame is a bit larger than the Blazer. I wanted the smallest flame, so this was a negative for me. The instructions are printed on the side of the main tube, which is handy. It also includes a soldering iron tip. $32 3. Dremel 2200-01 https://www.amazon.com/dp/B00MJW07Z0 Made in Taiwan. Includes a decent thin metal box containing lots of accessories. If you don’t already have soldering equipment, this might be the best choice for you. It comes with a detachable stand; all the others come with a fixed base stand. The flame comes out at an upward angle, which all the others have a flame coming out at 90 degrees. This may be a plus or minus for you. This one, like the Bernz-O-Matic, comes with a plastic child lockout that looks like it could be broken off and discarded if you don’t want that feature. This one got second place in the biggest difference between minimum and maximum flames. The maximum flame was the largest of all tested, so if you’re looking for max flame, this is the one for you. At $56, the most expensive, but it comes with a lot more accessories than the others. Both the Dremel and the Bernz-O-Matic could easily be started using one hand, even with the child interlock. The Bernz-O-Matic was probably a bit easier to light with one hand. Both of them featured instant-off flame when you releaser the button, with a lock to engage for continuous flame. 4. RAVS RBT018 https://www.amazon.com/dp/B0B5RKWNMS?th=1 Made in China. With the first three, you press the igniter button to turn on the gas and light it. The flame stays on only as long as you continue holding down the button (unless you engage the continuous lock). As soon as you release the button (or the continuous lock) the gas is cut off and the flame goes out. Probably more “consumer-safe” for people who don’t really know what they’re doing with a torch. This one is a bit different from the first three, in that it operates more like a typical propane torch. There is a rotary knob that you turn CCW to turn the gas on or CW to turn it off. So you turn the gas on, then press the igniter button to light the gas. You adjust the flame from min to max by using the rotary knob. The flame stays on until you turn the rotary knob fully CW to shut off the gas. So perhaps a bit less “safe” for those who don’t really know how to operate a torch safely. This one also felt a bit heavier and more substantial that the others. Apparently it uses more metal and less plastic. It also had, BY FAR, the most adjustable flame, from less than half what the others could produce (like down to about ¼” flame for some really fine work) to considerably more than their maximum flame. This one was also the cheapest at only $22. It’s also made in China. Normally, I will go to great lengths and spend considerably more to buy USA-made products, with probably Japan second and Taiwan third. However, for MY specific requirements, this Chinese RAVS was the clear choice for me.

Really love these little torches. My old Portasol soldering/torch iron failed, couldn't fic it. Luckily I had the chance to use this torch from another coworker. AWESOME. On instantly good flame too. So I ordered the kit with both the torch unit and the soldering iron. No complaints , have used it about 10 times in a few month's so far. My uses are usually to release glues and retaining compounds on steel components, but I have also used the soldering iron, and the attachment for hot air to shrink heat shrink tubing. Works great and has a nice case that looks like a GIANT Sucrets/Altoids tin container.

Excellent! I bought this for working with fluid art and it’s excellent. Love the quality and the case it comes in.

My reason to purchase to enable me to shrink wrap wires in my car. I'm in a condo so don't have available outside recepticles. It allows me to do just what I needed. I may give it a try in soldering but just to see if it will first. I don't doubt that it will. Remember it is a hot flame creating a hot device but by no means is it dangerous to use. Well let me just say with the lack of common sense among so many people a fork could be dangerous so in those cases just stay home and never go out. Pay others. I do not suggest D I Y. Great quality by the way but 'It's DREMEL'.

I have had this torch for over a year now. This is my third micro. This is my favorite. Quite honestly, as far as annealing, soldering, and making casting grains, this is one of the hotter flames on the market for a micro. I really appreciate the accessories that come with the product. It is easy to fill with canned butane, and maintains a consistent flame for upwards of an hour without the canister becoming warm. For anyone looking for a reasonably priced, hardworking and reliable micro torch, give this one a try. I am fairly certain you will not be disappointed.

思ったより火力が弱め、プリンスの方が火力はあるけど安全ロックなど、使いやすさはこちらかなって感じ

excelente para trabajar en manualidades fácil llenado de gas y potente me agrado.

As the owner of Devil n Dove, I am extremely satisfied with the Dremel 2200-01 Versa Flame Multi-Function Butane Torch. This versatile tool is perfect for a variety of tasks in our workshop, including wood burning, leather crafting, stencil cutting, and cordless soldering. It's also fantastic for hot-knife cutting of foam, plastics, and rope. The torch is easy to use, heats up quickly, and provides consistent performance. Whether we're working on detailed art projects or practical repairs, this butane torch is a reliable and essential tool in our arsenal. Highly recommend for any DIY enthusiast or professional!

Works well for soldering. Doesn’t come with some versatips…I wanted the knife for hot cutting of plastics. Couldn’t find it anywhere and called Dremel, who told me the knife wouldn’t work with this one, that I had to buy the model over $100 for that. I said no, it’ll work on this model, and it did. Dremel’s butane torch line isn’t their most successful and supported, but they work well. Don’t buy the expensive one as the versatips fit this one at under half the price, unless the pen format is something you need for crafting.

Good product