Triple MP5 MAG Pouch

Some might think I'm crazy, but I bought a total of 12 of these magazine pouches, they're that good. I initially bought only one pouch just to make sure that my magazines would fit. Even though no instructions were included with the pouches I soon figured out that the "top" strap & buckle assembly were attached with Velcro. Using a couple of plastic picknik knives I got the Velcro to release, making adjustment of the straps easy. I later used a plastic ruler for this adjustment, it fit just right. I have two types of magazines for these pouches, 33 round Glock 9 mm and 32 round Mac-10 (Ingram) 9mm. The Glock mags slid right in and were firmly held even without buckling the top strap. The Mac-10 mags fit a little tighter, but they did go all of the way in and were really tightly held even without the top strap being buckled. I'm sure that, after a bit of break-in time, the mags will be easier to withdraw but will probably never really be what you could call loose. The Glock and MAC-10 mags fit so well that I doubt you'd be in any danger of losing a magazine if you didn't use the top strap/buckle. Bottom Line, these mag pouches are great. You can hang them from a belt or put on MOLLE gear. The pouches are pretty light weight as far as actual weight is concerned, but as for the quality these pouches are real "heavyweights." The materials are very tough and should last through years of hard use. I predict that the first part of these pouches to break are the buckles (they're always the first to go on any gear) and maybe later the MOLLE straps on the back might break a snap or tear off. HOWEVER, you'd have to almost intend to break or rip any of the materials, that's how tough they are. For less than $20 bucks you'll get a first quality product, much better than most offerings from other suppliers and much more durable than other pouches that cost much more. You can't go wrong buying these pouches.

The material is nice, the cordura weave is tight and to be expected. The stitching is good, but not over the top. It should last a long long time, especially since these are not load bearing or designed to be for such. I have found that Glock 33 rd stick mags fit perfectly and this is what I utilize them for. It keeps them secure without the velcro sound when pulling out a mag. The molle attaches to a vest or a bag with ease and keeps what you need ready at hand when you need it. I find the Condor products to be very well made at a very reasonable price. I keep coming back to them time and again because they do what is intended without charging you $50 for each pouch. I know they aren't made in the US and do not carry the premium price tag. Are the US manufactured premium products better? Maybe...but it isn't worth 3x as much, since I am not relying on them for tactical entry and combat. If I was, I would probably be using the US gear, but then again, I would probably be spending tax payer money, so it becomes easy to choose. I may never put this gear to hard use, but I am confident that they will fit the bill if the need ever arises.

I'm giving this a 5 star because of quality and because it's really good for what it's made for. It is tight with great retention which you would want particularly with longer more exposed magazines. It's a double fastening system for the flap with good quality Velcro and a solid buckles. The trailing ends of the webbing used to adjust the buckling end of the security strap is secured with Velcro so you don't have loose ends. If desired, the strap and buckles can be easily removed. The strap is really unnecessary for shorter mags. While I don't intented to use the higher capacity mags that would be a future option. The holder will not accept the banana mags used with the 10/22s. Too bad. As with the other Condor products, the quality is very good and reliable. It has the usual molle attachment system. In this case three rows of horizontal webbing and two straps attached to lace through and finally secure with snaps on the trailing end. The Condor molle system works well for me making attachment clip purchase unnecessary. Long term durability is unknown but, I recommend this product for the use intended with little reservation.

It’s a mag pouch. For SMG mags. Three of ‘em. Works like it should. I have it attached to a thigh rig that works well. Haven’t had any issues.

I have to say I'm a bit of a fan for Condit gear. I've bought different pieces of gear from them and they stand up well compared to similar gear from speciality sites for about half the price. So to keep it short: PROs- price is good (holds 3 mags for the same price as the single mag holder), has Velcro and adjustable clasps for different mags sizes,will hold GLOCK 33 round mags (holds snuggly once straps are adjustrd), and is easy to attach to a vest\carrier\MOLLE gear. CONS: attachment straps only have button clasp to secure to MOLLE loops (Velcro on back with button clasps would be doubly secure) and Velcro on the front is noisy (Velcro is on the clasp adjustment so pulling on the clasp before unlocking the clasp could make some noise while trying to pull a mag). So I would recommend getting one of these if you have an AR-9 or a BLOCk pistol and want to carry 27 or 33 round magazines cause they'll let you pack more fire power on you and you can decide how much you may want and where.

This is a very well designed and constructed smg mag pouch. Small quality control problem but for the price this is acceptable. One of the pouch straps was sewn on lower than the other two.

Fits Glock extended mags.

This mag carrier is fantastic. For the price, it's very hard to beat Condor. The multicam pattern is nice and the carrier is well built. Standard MOLLE webbing on the back, 3 horizontal rows and 2 vertical straps. There's a lot of conflicting reviews when referring to magazine compatibility. I can tell you that as of today, Sunday March 13 2016, this carrier WILL fit three (3) separate brands of 33 round Glock 9mm magazines. I currently have an OEM Glock 33, an ETS brand 33 round, and a Korean 33 round magazine in this carrier. Each magazine is retained by the buckles, as they came out of the package, no adjustments necessary. Also, the velcro is attached by at least an entire inch. As for the 10/22 mags, I have a Butler Creek Hot Lips 25 round and an OEM Ruger BX25. They both will fit but are VERY snug and require a bit of exertion to insert into the carrier. The flaps to hold them in will kind of work, but the curvature of the magazine, along with how tightly they fit, makes the flap pretty useless. I won't use this for my 10/22 magazines. Overall. I'm happy with this mag carrier for the 33 round Glock 9mm magazines. The 10/22 25 rounders? I'd keep looking.

Awesome pouch. Fits 3 of my airsoft MP5 mags no problem. Were really snug at first, hard to get the mags in but a few days with the mags left in breaks them in quick.

Magazine passen rein und haben kein Spiel, gut. Verarbeitung macht soliden Eindruck. Erfüllt seinen Zweck. mfg

グロック(ガスガン)のロングマガジン用に購入。ベルクロの調整のみでなんの問題もありません。 収納部のゴム部分もしっかり保持してくれるため、蓋が開いても落ちることはなさそうです。

fits my Mp5 airsoft mags no problem with a little force and a wiggle, Molle straps are strong and the cover for the pouch makes it impossible to loose mags on the move

Ás advertized. Good quality.