NEW St. Croix / Even Temp Control Board - Circuit Board Part # 80P30523-R -NEW STYLE

Easy to install, works great !

Pellet stove not putting out enough pellets to start, no burning hot and not increasing blower speed. This fixed it. Works great now.

Used on a 2005 st croix exp Prescott Pellet stove, my jumpers were bad and the original Control board needed to be updated. I like that you can adjust by a flick of a switch, to select manually, thermostat or smart stat. I run a mechanical thermostat switch. I prefer this to be the easiest for me and to control even temp through out our home.

replaced old control unit now the stove works like it should

I bought this circuit board from this seller. It was defective, the stove tech spent 2hrs checking everything on my stove and the board which he found there was no control from the board going to the convection fan. The stove tech put a new board in and the stove worked perfectly .I had already paid an electrician to install the wiring and board . If the board wasn’t defectiveit should have worked. I called for tech support after the electrician installed it because the heat level won’t move from 2. The electrician and him spoke but it still won’t work, that’s when he told me to call in a stove tech. He said to return the board so he can check it for any defect. After several days, he said he found no fault with the board after he ran it through his tests. Refused to refund me the full amount , only 50% refund because he said it’s now considered used but I can rebuy it at 25% discount.So, to sum up I paid an electrician and a stove tech for service and labor costs and a new circuit board.I was only refunded 50% . Very poor customer service.The orange colouring on the board should not be there. That’s what the stove tech who installed a new board told me. Pellethead tech said it’s glue which doesn’t cause defect.

it works perfectly

Fairly easy installationBut must be programmed for our Hastings modelHas a cool-down cycle the OEM didn’t

Fit right, plugged right in. Simple programming instructions included. Works for me.