Tool S0101 7-inch Speed Square Layout Tool with Blue Book, [New Version]

One of the best!!!

The name says it all......

One can go for it. An valuable working asset.

Wonderful piece of engineering, simply awesome.

Worth buying though expensive

Good

Accurate and durable

Good Finish, sturdy, nice feel.

This is not a replacement for an adjustable combination square and is not suitable for fine work, but for its intended use in framing work it is brilliant. The pencil notches for marking lines parallel to the edge of a board are very useful when ripping wood and the protractor feature is surprisingly usable (though again, not really for marking off 3.25 degrees!) The wide base makes this convenient for checking joints for plumb as it will stand on its own quite securely; this base also makes a really solid rest for when you want to mark a cutting line at 90 degrees - it hooks over the edge of a standard CLS 2x X timber perfectly and gives a far more positive result than a standard combination square (the full length of the side of the square being in contact with the timber really helps here too.) I have not yet used the square for the purpose for which I bought it (laying out rafters for my current project) but hope to do so soon - the accompanying "blue book" seems fairly comprehensive and I'm confident this square will make my life a lot easier when the time comes. Overall the square is well made from nice thick metal and very nicely finished. My only criticism would be that the black paint applied to the markings wasn't particularly thorough; as the markings themselves are deeply recessed into the metal there is no issue in practice. Edit: I have since used it to make rafters and very much more and it was excellent. Once you've figured out the desired roof pitch it's so simple to get every cut at the right angle - not just for rafters but things like barge boards, sheathing, lining, interior trim etc. Worth every penny.

practica y util , resistente e indeformable , buen producto gracias

Davvero fantastica la famosa "Speed Square" della Swanson. Realizzata in alluminio, robusta e leggera. Ho preferito la versione originale da 7 pollici perché la versione in metrico decimale è più grande e leggermente diversa. Per quanto mi riguarda il fatto che sia in pollici non mi crea nessun problema. Non è una squadra per lavori di fino ma da carpenteria (utilizzata principalmente per la costruzione di tetti). come squadra di precisione utilizzo una combinata Starrett. Comodissima per mettere in quadro due pezzi, come guida per fare un taglio a 90° con la sega circolare a mano, per tenere fermo e bene in quadro un pezzo da tagliare con la troncatrice, per tracciare linee parallele lungo un'asse o una tavola... Con un filo a piombo si può anche usare come livella (appoggiando il lato lungo sul piano e facendo passare il filo sul "pivot point", il filo deve passare sulla linea dei 45°, e si è sicuri che il piano è livellato). Nella confezione è presente un libretto in inglese con tutte le spiegazioni tecniche per i suoi svariati utilizzi. Immancabile nel corredo di falegnami, carpentieri o feticisti dell'utensile :D

Bought this for my husband. Delivery was prompt and item was as expected. Hubby was so happy with the included blue book.

product is as described.