Dash Cam Suction Cup Mount and Glue Adhesive Mount Compatible with Dash Camera/DVR Video, Come with 10+ Different Joints Suitable for Crosstour, YI 2.7", Rexing V1P, UGSHD, APEMAN and Other Dash Cam

We recently had a clear ceramic film installed on the front windshield of our vehicle and were told not to use suction mounts as they could damage the film. However, or dash Cam only had the suction mount. I went searching and this in the only adapter kit that I felt would work. With all the different couplings, there was one that worked with my camera and I was able to use the 3m adhesive mount. Working great. So great I purchased this project a second time to mount a different dash Cam in a different vehicle for the same reason. Just love all adapter options, you should find one that fits your camera.

Every time we parked facing the sun, our drive camera would come off the window using the mounting hardware that was included with the drive cam. Putting the camera back up and fixing the cabling was getting old. We used the parts with red 3M adhesive and the drive cam is not going anywhere. Very pleased to have the camera more permanently mounted. The kit has many different connectors which should fit most drive cams or radar detectors etc.

The Kenwood DVR A310W dash cam does not come with a suction cup mount. I have not found ANY aftermarket mounts that list the A310 (don't mix it up with the A301, which seems to be discondinued, but did have an included suction cup mount). To be sure, this product did not promise compatibility. It had a large number of options, so I took a chance. The suction cup looks good. I haven't given it a long-term test, of course, but all the components look sturdy and promising. The issue with this mount and the A310 is that all the mount options are the same 'depth' (see the picture). They have a variety of widths of the little flange that slides into the camera body, and one of them would be adaquate for the A310, but the A310 needs the flange to be a little deeper... just a little. This mount and the A310 both use a ball/socket to let you rotate and position the camera. Unfortunately, the A310 is a very small camera, and it's ball is also much smaller than this mount's ball. Again, it does NOT list the A310 as a compatible camera. I took a chance. The mount was $10. I won't ask for my money back - I have lots of other electronics, and I can probably jury-rig it for another use. I'm just hoping in this review that anyone searching for a suction-cup mount for the Kenwood DVR A310W camera will find this review and keep looking, as I will.

I bought this for a DDPAI dash cam so I can move it from car to car. I had to play around with the pieces to get the right combination, but it works perfectly. The suction mount has yet to come loose from the windshield.

These are a rip off. Bought 2 of these for the suction cup mounts and neither came with a suction cup like it said it did. The suction cup was the only reason I purchased these. Very dissapointing!!!!!

My dash cam is getting old and the suction cup mount is dried out and would not stick to the windshield anymore. Finding a replacement mount is always a task. I purchased this generic mount hoping it would work. Well none of the included adapter would work, however I was able to use my old ball mount and insert it into the new suction cup. So, 3 stars because technically it works.

Great assortment of camera mounts. It's comes with suction and tape mounts. Easy fix.

This small suction mount was perfect for my needs. I wanted to put my Garmin Mini Dash Cam on a suction mount but all it came with is adhesive mounting. I ended up using the double sided adhesive to stick the dash cam to the mount so now I can move it between cars when needed.

I had to replace my cam suction cup mount and this package contained enough adapters to make it work 100%. The suction cup is very pliant and should last me at least as long as my original…about 8 years.

The suction works better on the window than the dash