BOLITE 18014 Bird Feeding Station Kit, Bird Feeder Pole Stand for Bird Feeders, Planters, Lanterns, Wind Chimes and More Satisfaction Guarantee

Pros:- No tools necessary to assemble, and the assembly took all of 5 minutes.- The bottom spikes screw in securely.- The attachments are also quick and easy to assemble, for the most part.Cons:- Most of the pieces are held together only by gravity. It's super quick to assemble this, but there's also no screws or clamps holding anything in place aside from the bottom spikes.- The stand doesn't stand up straight. This is mostly caused by what I said above. The pieces don't fit together tightly, so there's a little wiggle room for the entire stand to curve and lean, especially after you hang things on it. I ended up tying this to a handrail because it fell over entirely once I hung my bird feeder on it.- Some of the attachments don't fit the stand. One of the hooks and a loop for a tray didn't fit in mine, either because the knob bit on the attachment was too big, or the opening on the stand part was too small. Again, since there's no screws or anything, there's no way to adjust the parts to make them fit.Overall, this is probably the cheapest bird feeder stand you'll find here, but be prepared to have to work with it to make a functional product.

First, when I unboxed the stand, the decorative top was broken and had one of its shapes broken off at the base. The box was not damaged, so the piece being broken is strange, and must be related to the way they packaged it. The decorative top still attached as designed to the top of the stand.((UPDATE...the companies customer service is amazing. When they realized that my stand was partially damaged from shipping, they sent me, at no cost to me, a replacement so that I had the complete, perfect stand that I had paid for. So their customer service gets a100% mark for making sure their business image is perfect, just like they want their stands to be.)) Assembling the pieces of the stand was easy the parts just screw together for a firm fit. All the pieces fit and I had no issues with assembly and there are a couple different attachments to you can completely customize the stand for your needs. The four prongs base for the stand went into the ground easily and gives the stand a strong setting in the ground. The two accessory o- rings are handy and fully adjustable. I'm using one of the provided dishes for a small water bath for the birds. I hung a 2 tier bird feeder on one side and a Finch sleeve on the other. The stand holds both item's weight without any issues, and with the four prongs in the ground is a stable platform. As bird feeder stands go, this is a great investment for the price point and will definitely buy another when the time comes. The stand is also compact enough to move from location to location and still have the ability to use. I definitely recommend this stand for your feeders or bird houses.

So set this up very quickly. It's nearly perfect for MY needs.I didn't want one that was overly tall, the slightly shorter nature of this one makes it a lot easier for refilling the bird seed in the feeders I have that I have to lift up the top cap so this is the perfect height for me to refill without taking down the feeder. I also really only wanted the hooks for the feeders.The bath bowl is too small and needs constant refilling, but the rings used to hold the bowls make for a great spot to clip on millet or even materials for nest building.Down side, like others similar to this, the stakes are rather shallow in the ground making it fairly easy to fall over and limits the weight of the feeders you can use. Simple fix is to place a couple of heavy decorative stones around the base of it.

I only spent $20 on this so I knew not to expect too much, I wasn't even too concerned when I saw that the decorative piece for the top was broken when I opened the box.The pieces of the pole don't attach to one another (despite the instructions saying to screw the pieces together), and when I tried to screw the pole into the base that goes into the ground, the piece inside the pole broke and became lodged further inside the pole at an angle. I did manage to get it all put together and screwed into the base but it leaned heavily to one side and swung around with the slightest touch. Another reviewer had it right when they said that you would have to go to extra lengths to secure the pole and keep it from wobbling. Unfortunately I don't have anything to secure the pole to and with the bottom broken I can't even secure it to the base.

This product was shockingly woeful. To begin with, their quality control was lacking and brackets designed to hold other pieces had what I assume were hefty weld slag that wouldn't allow the arms to slip down into one of the brackets. When I placed the stand outside it had fallen on the ground within 2 days. When I went to put it back up thinking I might need to add longer prongs to secure it in the ground, I found one of the four prongs busted off and 2 bent badly.Two days and it fell apart.

I bought this bird feeder with hopes it would be all it was touted to be. Unfortunately, it is not. While the upright pieces that are linked together are alright, the pieces you hook into the sides for the two round trays are not secure, they just kind of hang there. They don't snap into place or anything to make the fit tight. There are also four rubber caps that came in the box that I assume go on the two hook ends at the top. They are loose and useless and fall off. Overall I think I could have found a better feeder for the money.

This looked like a nice feeder; however, after putting it in the ground, one of the 4 prongs started bending. This was in soft ground, too. So, for awhile it lasted on the 3 prongs. Moved it the other day and another prong broke, so now it is unsturdy with only 2 prongs struggling to support it. Have big rocks around it, but we'll see how long it alts. Not sure I'd recommend.

In my initial review, I was disappointed that the fleur de lis was broken in the box. I thought it would be made of iron or other metal...it’s a plastic composite...not the feeder, just the top piece.The owner reached out and sent a replacement. That’s great customer service.Today I installed it and had visitors within the hour!