Could I use this to put a monogram on a puffer vest?

Nylon fabrics are touchy. Many nylons will melt or ruin if subjected to the high temps needed to iron on vinyls. Having said that if you could test an area inside say the vest or if it came with a stuff sack of same exact and I mean exact fabric then you may be able to tell if this vinyl could work for you. Of course you would need to buy this vinyl and have the scrap or test area to try it out on. There are special vinyls that work on medium or a bit lower temps than the high temps and that also involves usually pressing the fabric to warm it up. Then adding your design and pressing for around 15 seconds. Release press allow it to set a bit then without checking it out just press again for this time about 20 seconds. More time often is needed and mulitple presses as many as 3 to 5 because you are using it at a lower temperature to avoid melting a nylon fabric. Some puffers are made of blends not straight nylon and there are nylons fashioned to take higher heats as will as the vinyls made to attach with lower heat and longer pressing or muitlple pressings. Meantime I just wouldn't even try if you can't find a trial section to test 300 degrees and above on to see how it'll stand up to heating.

Cricut Permanent Basics Vinyl Sampler

التفاصيل

الوصف

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة