MotipM04037 Heat Resistant Lacquer-Anthracite-400 ml

It was the right colour

I waited to review this as I used it in summer when I could have the radiators off. I bought the anthracite one. It has stayed looking great throughout the winter with constant use. My rad is 2100 x 300 and was roughly the right amount in the can with several passes on the front and all the visible white on the back.

I use this paint as a primer on brake calipers. Heat the can for 10-15 minutes in hot water, give it a good shake and you're ready to coat. You'll see from the images attached that the finish is consistent and well adhered... perfect for a colour and gloss lacquer.The reason I've dropped this one star is because I also bought a can of Black. Again same good coverage and same result from the can but this was applied on top of the Grey as a colour coat. However the finish was a Satin Black and I wanted Gloss. I added a Gloss coat using ETech VHT Gloss but it reacted. So I re-prepped and repainted but this time I used the same MOTIP Heat Resistant Spray Paint Gloss. Luckily I tried this on a piece of spare metalwork I had lying around. It reacted again! Such as shame but I've now had to reside to having Satin Black calipers.Have already purchased more cans of the Grey for some Engine parts..

Perfect.I used it on the fire board around my log burner. I had gold leafed it and needed a seal to protect it.It's perfect. It doesn't spray too far. Easy to apply. Smooth finish. It's held up really well against the heat

My old Weber Q200 after some ten years of usage was beginning to show signs of wear to the exterior surfaces. Ordered this 800c heat resistant paint.Sanded the exterior and applied two coats as per the instructions Result-BBQ looks as good as new. I knew it would work as I've used it with success on my Motor cycle exhaust and it worked in that application. Thanks Motip and Amazon for the prompt delivery. BFJ

Poor quality

I’m on to my 3 rd can of this and only one can has worked properly. I have made sure nozzle is clear but after about 3 to 4 seconds stops spraying absolute waste of money and time as now I have to go find another similar colour from local diy store to finish the job.

Well it did what it said on the can, application was fine the paint gave a good clean spread. It dried quickly so I could apply several costs in one evening. The paint is on a wood burner and is holding its colour and is showing no signs of chipping or scratches. Colour is accurate.