Is it legal to flare 3/8 gas lines for wall mount heaters or furnaces with this tool?

To the question “is it legal?” ... you would have to scour your state and city codes to find a place where it expressly mentions not flaring with this method or manufacturers tool .. I highly doubt you will find that but stranger things have happened ... to speak to the functionality of the joint itself .. it will work but you will need to use some joint lubricant and you will find it very difficult to pull the flare nut over the copper flare because the spin tool tends to stretch the copper which has the effect of increasing the outer diameter(OD).. the flare nut is usually manufactured very close to copper OD . Hope this helps ..

can flaring copper 0.56mm/0.61mm??

Not sure you have correct pipe size if .56mm is .022 in. That is very small. Smallest size is ~ 6mm

What degree is the angle of the finished flare?

45 degree, foe standard SAE plumbing and hvac fittings

How is the swagging tool different from the flaring tool? The specs on each say the same thing

The flaring tool creates a flare to create a seal using a flare nut. The swagging tool swags the tube- expanding it to allow another piece of tube to be soldered into it.

ASIN	B01HN44E7U
Brand	Migrare
Finish Types	Aluminium
Finish type	Aluminium
Item Dimensions	15.2 x 15.2 x 15.2 centimetres
Item dimensions L x W x H	15.2 x 15.2 x 15.2 centimetres
Manufacturer	Migrare
Material	High Speed Steel (HSS)
Model Number	TRTAZ11A
Number of Flutes	2
Shank Type	Straight
Shank type	Straight
Surface Recommendation	Metal
Tool Flute Type	Spiral
Tool flute type	Spiral
UPC	735090745851 853481006043
Unit Count	1.0 count

FSPIN300 Flaring Tool Drill Bit Set With 1/4'' 3/8'' 1/2'' 5/8'' 7/8 Bits by Migrare

التفاصيل

الوصف

المواصفات

الأسئلة الشائعة