Flash FurnitureOffice Chair, Ergonomic Office Chair with Mesh Back Support, High Back with Headrest, Height Adjustable Seat and Tilt Lock Lever, Black, 60.96 x 64.77 x 133.35 cm

Buon rapporto qualità prezzo, assemblaggio facile, sedia comoda, poggiatesta un po' alto ma accettabile, difficile chiedere di più a questo prezzo. Vedremo se durerà.

Snygg, bra pris, bra stol!

Received today the chair and the base was broken, I sent it back.

Brauchte jetzt dann doch einmal einen Stuhl fürs Home Office , lässt sich einfach zusammenbauen und bequem/stützt gut den Rücken. Zur Langlebigkeit kann ich noch nichts sagen

This is a nice, comfortable chair. I bought two of them. Both assembled very easily. I'm 6'1" (73" or 185cm) tall and I weigh 212 (96.2kg). The chair is comfortable and the head rest is in a good spot. I like that the arms fold up out of the way when I don't need them and are easily lowered into place when I want to kick back a little. Like when I am on the phone.Putting the chair together was very easy. I do have some tips for you though.The best tip I can pass along is "Take your time putting it together." You don't have to assemble the chair in 5 minutes. Taking your time assures you will get it right. Follow the directions. They are easy enough to figure out.I've read where others had real trouble with the screws. They claim it was very hard to get the screws in. The screws are not difficult to put in provided you don't cross-thread them. If the screws start tightening up before the parts are secure, you need to *stop* and back out the screw and try again. The screw should thread in nice and easy until the parts come together.Another reviewer said the bolts look dirty or rusty. The reason it looks like this would be the thread lock they put on the threads of the screws. This material, when heated by the act of tightening the screw, will bond the threads together making it more difficult to come loose on you down the road. You can see this thread locking material in one of my pictures.Last tip on screws, do not crank down the screws when tightening. They do not need to be torqued like head bolts on a top fuel funny car. Get them snug and turn another 1/4 turn if it isn't too tight. You crank down on these and you will strip out the threads or break the nut loose. Be careful especially on the seat where the screws can easily strip the nut out or crack the wood. Think like the strength of a child, not an MMA fighter. :-)Finally, use the box it came in to rest the back on when screwing on the arm assembly. It just makes it so much easier.If you are looking for a decent low-cost swivel chair, you should give this one a try.Thanks.