for 2005-2013 Chevrolet Corvette C6 | C6.5 Style Rear Trunk Lid Wing Spoiler WickerBill with Plug & Play Third Brake Light (Painted Carbon Flash Metallic with Smoke Tinted WickerBill)

I really enjoy the looks of the spoiler on my C6 Z06. I had some issues like other with the bolt lengths... but after a trip to Lowe's that was resolved. Install on a Base or Z06 C6 is a little more difficult with having to drill the holes. My advice is drill bigger holes and use washers to cover. it will give you the room you need to get all the bolts started.

For starters it took three weeks to get it delivered. Also the center bolt holes don’t line up in the least, didn’t use those, the outside 6 should be more than enough anyways. Like another guy said, go get studs, fender washers and nuts and throw away the bolts. Looks pretty nice on the car and finish is good.

First of all, I want to say that this is a great spoiler for the price from both a cosmetic and functional perspective. I have an '08 Base C6, and with a few instructional videos on installing these types of spoilers on YouTube, the right tools, and some patience, installing this was fairly easy. The only problem I ran into, like many others, are the short screws. The provided screws to mount the spoiler to the vehicle seem to be intended without usage of the provided foam weather strips. If you haven't ordered this or you haven't figured out the new screws to get, buy 8 x "M6 - 1.0 x 16mm" hex head screws, along with an equal amount of M6 flat washers and lock washers. I got them from a local Lowe's. Another tip is when you install the screws above each of the tail lights, you can use a 10mm socket with an extension on a ratchet, in case you can't fit just the ratchet and the socket.Now some had mentioned they had to modify the plug on the brake light to fit, or they just plain didn't have the brake light installed at all. That wasn't the case for me, I had everything necessary to install the spoiler (less the 8x proper length M6 - 1.0 screws), but keep in mind this is just my experience and that could very well be different for others.Final thing I'm going to mention is the pretty obvious at this point. This is a knock off of the IAC C6.5 spoiler unfortunately, and the build quality between each are fair. If you don't like the finish of shiny abs plastic, a good vinly wrap job can really take the quality up a notch (just something to think about). Hope this review helps others on their decision to buy one of these or get the real deal.

Hard pass from me.

Came with wrong bolts, didn’t fit properly , not very easy to install. I think for what u pay this is a poor product !

Looks amazing, fits perfectly, awesome purchase thank you!

Packaging was good and spoiler arrived without damage. I didn't like the hardware that came with it, so I made a trip to the local ace. I put studs in the bottom instead of the puny bolts that come with it. This helped because the center 4 holes on the bumper didn't line up and had to be opened up. The studs help you figure this out. I also put fender washers on the studs before the nuts. Most of the holes on the sides and back of the spoiler had epoxy blocking the bolts that hold the stage 2 and 3 parts on from seating all the way. I drilled my way through and used a 6mm×1.0 tap to cut the rest of the epoxy out of the way. All in all its a nice piece, just know moving forward that your going to have to buy some hardware and fix some small problems before the install can be completed. Oh, by the way, the 3rd brake light was installed.

Excellent product and easy to install even if you are mildly mechanically inclined. Final looks is brilliant and and fully functional. Very professionally design product.