Step Up Your Jeep Game! 🚀
The TAC Side Steps are designed for 2007-2018 Jeep Wrangler JK 4 Door models, providing a perfect fit and enhanced safety with non-slip pads. Made from heavy-duty powder-coated mild steel, these side steps are rust-resistant and built for durability. Installation is a breeze with included hardware and instructions, and they come with a 3-Year warranty for added peace of mind.
Color | Gloss Black |
Brand | TAC TRUCK ACCESSORIES COMPANY |
Material | Alloy Steel |
Exterior Finish | Alloy Steel |
Item dimensions L x W x H | 79 x 11 x 8 inches |
Vehicle Service Type | Passenger Car |
UPC | 840813125640 |
Manufacturer | TAC |
Model | Step Rails |
Item Weight | 41.4 pounds |
Product Dimensions | 79 x 11 x 8 inches |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | FBADN1900 |
Position | Front |
R**S
Perfect fit on 2018 Jeep Wrangler JK
Tac side steps were easy to install even for me who is not mechanically talented! They are very sturdy and fit perfect. My only negative thing is the driver side step had a noticeable dent on top (pictures) when I removed the plastic! I was too excited to try and send it back so I installed it anyways. Tac side steps look great on my 2018 Jeep Wrangler!
C**I
Great product!
I wasn’t looking for anything fancy and did not want to spend a crazy amount of money and so I settled with these. They serve their purpose and I really like how they look! As far as installation goes, I am not someone who uses tools often but was able to install them myself after watching a couple YouTube videos :) I definitely recommend!
M**K
LOVED IT!
My Jeep Wrangler 2017 Sport is my baby and I loved everything about it but needed side bars so I called a junk yard which told me I can get each for $150 which was ridiculous for me I just am 5'2 so I need a step to get up without hitting my knee every time. Anyways checked amazon and found these and thought to good to be true I ordered it and it was great! the only issue is the front wheel side step there is going to be three you have to drill in the ones by the front tire you have to work on a little more then the rest. WORD OF ADVISE: DON'T LISTEN TO THE INSTRUCTIONS put the side bar on the last two both passenger and the other side drill in the side steps while you holding the steps in place at the same time don't drill in the parts and then add the side steps because again the front handles there will be 3 of them they are the small ones you have to work on it is the shortest which causes some more time but it works. Overall worth it!!! I love it and you will to don't waste your time buying it from somewhere else because it will cost more! by the way my dad and brother are 180 pounds and both stood on it from both sides and it was good! recommend it for sure!!
A**S
Great looking rails!
These rails look great and a easy install for the novice. Everything was packed properly and wrapped individually. As you can see the parts were stamped so easily read and layed out for easy install.I have threaded holes underneath my jeep, so I use the 8 mm bolts that came in the package. If you have the big openings and no threaded hole use the 10 mm bolts that are included. I put everything on loosely, use the level at the end and then started tightening up all the bolts.They look great and give my 2016 jeep Wrangler sport the look I have been wanting! Sturdy rails, solid welds and holds up big guys getting in and out of my Jeep.
M**A
Jeep foot bars
Works awesome looks great easy to install
R**R
Fits ALL jeeps...you just have to align it!
I saw reviews that it didn't fit and people had to drill extra holes...well I have to laugh at them because it fit perfectly but you do have to align the bar to the holes of the jeep. I did make the mistake thinking the holes didn't line up when I got to the end of the installation on one side...I had to take it all off and readjust but it fits perfect so don't make that mistake. This was definitely worth every penny and a great value, looks awesome.
E**A
Good quality and easy to install
Bought these for my 2016 Jeep Wrangler. Arrived 2 days prior to the listed date. Good quality and easy to install. Instructions are a little difficult due to the fact that there are no pictures to identify the bolts and washers. But using process of elimination and a little bit of common sense I installed them my self. Took about an Hour and a half to install because there are quite a bit of bolts. Don't be surprised if you end up with a handful of extra bolts, nuts, and washers. I'll give it 5 stars now and wait to see if anything changes.
H**E
The brackets don't quite line up in 3 out of 6 places on 2017 Wrangler Unlimited 4dr
I have a 2017 Wrangler Unlimited Sahara with 4 doors. I wanted these because they look nice but I am about to travel the US for a year so if they got dinged/banged up in our travels, they weren't that expensive. I guess maybe I should have thought about this a little more.Overall the removal of the factory rock rail was easy, as long as you have right tools. I am solo and had them both off in less than 30 minutes (slight issue with missing one wrench and a trip back inside plus a few phone calls for work).I began installing the brackets after going through and checking all the parts and sorting them for easy access. First two on passenger side went on amazing. Passenger rear did not quite line up. I managed to bend it so it would fit and began on driver's side. Got the first one installed, no problem, or so I thought. But sure enough, the bracket was out of alignment. Then, the center and rear on driver side had same issue as the passenger rear except I can't quite get them to bend. It took me sticking a screwdriver in the bracket hole and then into the frame hole and maneuvering it so it would align. I scratched my paint doing this.The 6 brackets for loose install took me about an hour because three are bent. I had to stop due to a thunderstorm and living where we get lightning hits quite frequently where I live.It took me a total of 3.5 hours and that was with issues. As you can see from my first picture, the bracket is maxed out against the bolt. I didn't get a picture of the top portion where the two screws attach to the frame but I basically had to strong arm this in place because the holes just would not line up on 3 of the brackets.Once I finally got them on, the step rail itself did not want to align. I had to put one screw in and then shove a screwdriver into the bracket hole, then the screw hole and wedging it so I could get one screw in on the remaining rails. I had to do this on almost every single bracket to get just one screw in. Once those screws were in and things were tightened, I was able to put the second screw into the second hole on the rail.Overall, they look nice. I can't help think that if the quality of the machine work was better, these would maybe take and hour to hour and a half to install.Instructions were okay. Definitely lay all the pieces out familiarize yourself with them before install. Nothing is too heavy that it can't be carried easily. I'm 5ft tall, female, and live on the 3rd floor. I was able to carry rails and parts down no problem. I did not carry the whole box because I knew I'd be racing the clock with the thunderstorm.I hope the issues with brackets are not indicative of lack of quality. I did check my rails and did not find any dings as others have. I did, however, get stabbed by a bur on the underside of one of the brackets so use caution...and maybe gloves.So, three stars because it was more work than it should have been.
ترست بايلوت
منذ أسبوع
منذ 3 أسابيع