Sunnyside 63432 2-Minute Remover Advanced Paint & Varnish Remover Gel, Quart

It takes off paint, off wood really good.. smell strong wear mask. Ease to use & works well..have scotch bite red/gray or steal wool to remove excess & alway clean before painting

5 Stars! Worked as EXPECTED. For those having difficulty, it has to be user error. I used 5 generous coats of the 2 Minute stripper on an aluminum heat-shield with approximately 10 coats of primer and paint. The part had been cleaned up and resprayed over the last few years, so I knew I had some work to do. Once I was able to break through the paint, softened enough, with a plastic “razor blade”…I just scraped the paint right off. A few more coats to get the stubborn areas and it was good as new. I dry wiped the part free of as much paint, then washed the residue off with lots of heavy dish soap and hot water. Buffed the heat shield up and slapped it back in the bike, all within 30 minutes. If you are expecting TikTok type of reaction/result of the paint just miraculously lifting off of the piece you’re working on, then you’ll be disappointed. If you understand that the product needs to attack each layer one at a time, and that some elbow grease, with proper PPE, is involved then you’ll be happy to give 5 stars!

Does Not work. Used on a chair with 4 coats of paint. After 3 generous layers of sunnyside, I got first layer of paint off. After 4 additional tries I got 2 more layers off. And that was just 1 small area. Even tried technique of wrapping in plastic for 30 minutes. Don't waste your money if you have a tough job. I've already ordered a different product. This one is trash.

I don’t know what kind of paint I was removing from this metal frame but it had regular looking primer underneath. It wasn’t powder coated for sure, maybe it would’ve worked if it was.It didn’t work at all, only made the surface a little gooey and I wound up cleaning it and sanding it. It didn’t wrinkle up at all. I’ll try it on my next project and see but this one was a bust.

Not effective for old multilayered painted surfaces. Underlying paint layers are not softened by this product. Seems reasonably effective for thin single layers only. Other than that, it adheres to vertical surfaces well and does not have an overwhelming chemical smell.Edit: Found a technique that works on old multilayered paint surfaces. Coat the painted surface with this product then cover the area with painters tape ensuring good contact between the tape and the painted surface. Wait for 30 min or longer which allows the product to penetrate to and soften the lowest layers of paint. Works well for ornate profiles that are not amenable to sanding.

Have been using various paint removers over the years, but this one is hands-down the very best I have ever used. Not only does it remove paint (enamel as well), but the paint floats away from the items.....quite a pleasure to not have to scrape ANYTHING.....works like a dream!!

I've used this many times when I need to strip furniture. Very satisfied with the results. May have to do a few times, depending on how many layers of paint, or if you are removing varnish. Removing varnish is much messier than paint. But still, a good product and would purchase again.

Product does work, not as fast as the can says. You’ve gotta leave it on for a lot longer. Does work fit be patient.