تسليم إلى EGYPT

للحصول على أفضل تجربة احصل على التطبيق

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان
KOREA

خدمات العملاء

معلومات عنا

دعم العملاء

Arducam Multi Camera Adapter Module V2.2 for Raspberry Pi 5, 4B, Compatible with Rasperry Pi Camera Module 3/V2/V1, and 12MP IMX477 Cameras

Arducam Multi Camera Adapter Module V2.2 for Raspberry Pi 5, 4B, Compatible with Rasperry Pi Camera Module 3/V2/V1, and 12MP IMX477 Cameras

Q: Is it possible to stack two of these modules togheter to get 7 cameras working on a single Pi?

I don't thin this would work. I have been building projects based on this board for about two years. I have around 100 devices on shop floors using the Arducam Multi-Cam boards. I would not say I am an expert. But in my experience, the board works well, but it is deceptively simple. The Arducam board is not a true multiplier, it's more of a switch that rapidly switches between the 4 camera ports by enabling pinouts on the Pi. You can't daisy-chain them to expand to more cameras as the switching is enabled by activating a different GPIO Pin. I2C calls are made to activate the camera ports on the Arducam board. In theory, you might be able to customize a pinout adapter to attach to more than one Arducam board. But, it would require quite a lot of fiddling to make it work if at all possible.. Given the board can be a little finicky, I'd expect a lot of experimenting and seed bumps. I have a robot project with 8 camera sensors on board and went the USB expander and USB camera route. It is not as fast as the Arducam board, But I cam stream video simultaneously on more than one camera which is not possible on the arducam. By no means is this a panacea. But, offering as an alternative approach.

Q: What's the maximum resolution for video on two cameras? Specifically on the Jetson Nano.

Hi, this is a switcher adapter, and it won’t affect or decide the resolution per se - the specific camera you connect to the Nano does. It’s like a TV remote can change the channel but won’t affect your video quality. If you connect two cameras to this adapter and then to the Jetson Nano, it means your Jetson Nano TV now has two channel to change between. The other Arducam Stereo Camera HAT is used to connect and synch two cameras and display the 2 camera feed at the exact same time: https://youtu.be/QVBSTm4Fne4

Q: The description is vague (low res?) Can the board support 1920x1080 video and, if so, at what frame rate.

I am using four 8mega pixel pi cameras, at 3280x2464 for still images they are not simultaneous but sequenced. because the board uses I2C and 3 gpio pins to switch channels sample code has examples for still and video, looks like camera resolution is set to (320,240) and 24 framerate, to see all four channels, Not part of my application so didn't test video.

Q: Will this support the new raspberry pi camera v3 12mp?

Tested! It can support the new raspberry pi camera v3 12mp. Any questions, feel free to contact us: linda@uctronics.com

معرّف المنتج: 162884671

معاملة آمنة

التفاصيل

Brand
Arducam
Operating System
Linux
Graphics Card Description
Dedicated
Memory Storage Capacity
1 TB
Personal computer design type
Barebone
Model Name
Arducam Multi

🎯Up to 12MP IMX477 compatibility

📸Supports 4 cameras sequentially

🔄Seamless multi-angle switching

الوصف

📸 Elevate your Raspberry Pi vision with multi-angle mastery!

BROAD COMPATIBILITY - Works flawlessly with Raspberry Pi 5, 4B, 3B+, and multiple camera modules including V3, V2, and IMX219.
QUAD CAMERA POWERHOUSE - Connect up to 4 Raspberry Pi cameras for versatile 360° capture.
OPTIMIZED FOR PHOTOGRAPHY - Designed for high-res still images with reduced frame rate for video, perfect for professional-grade snapshots.
SEAMLESS CAMERA SWITCHING - Easily toggle between cameras for multi-angle perspectives without missing a moment.
HIGH RESOLUTION STILL SHOTS - Capture stunning 12MP images with IMX477 sensor support.

The Arducam Multi Camera Adapter Module V2.2 enables Raspberry Pi users to connect and switch between up to four compatible cameras, including high-res 12MP IMX477 sensors, delivering versatile 360-degree photography capabilities optimized for still images across multiple Raspberry Pi models.

المواصفات

Screen Resolution	1920 x 1080
Max Screen Resolution	1920x1080
RAM	DDR4
Chipset Brand	Broadcom
Card Description	Dedicated
Wireless Type	802.11ac
Brand	Arducam
Series	Arducam Multi Camera Adapter module V2.2
Item model number	UCT_B012001
Operating System	Linux
Item Weight	1.13 ounces
Package Dimensions	2.44 x 1.97 x 0.75 inches
Processor Brand	Broadcom
Number of Processors	1
Computer Memory Type	DDR4 SDRAM
Hard Drive Interface	USB

لديك سؤال؟ انظر ماذا طلب الآخرون

Is it possible to stack two of these modules togheter to get 7 cameras working on a single Pi?

What's the maximum resolution for video on two cameras? Specifically on the Jetson Nano.

The description is vague (low res?) Can the board support 1920x1080 video and, if so, at what frame rate.

Will this support the new raspberry pi camera v3 12mp?

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

عمران ف.

متجر موثوق للغاية ومنتجات أصلية. سأشتري بالتأكيد مرة أخرى!

منذ أسبوعين

يوسف أ.

تجربة رائعة بشكل عام. سأوصي بها للأصدقاء والعائلة.

منذ شهر

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

خدمة ملايين المتسوقين في أكثر من 100 دولة

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

E£ 8224

الرسوم والضرائب مشمولة

EGYPTمتجر

الشحن مجاني

with PRO Membership

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية

معاملة آمنة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

ميرا ل.

معاملة سلسة ووصل المنتج في حالة مثالية.

منذ 3 أسابيع

أنیتا ج.

تجربة جيدة، لكن كان يمكن تحسين تحديثات التتبع.

منذ شهرين