Comimark 100Pcs Miniature lamp 3mm 12v Indicator Bulb Bombilla Incandescent Filament

Seems to be a good indicator bulb. Leads are shorter than I would have liked. Draws 55mA at 12VDC.

Way cheaper than buying the Volvo part with the housing for 15.00 each. Just remove the blue cover from the factory bulb, unwrap the wires and pull old bulb out. Put blue cap on these, slip the new bulb into the old plastic housing wrap the wire and reinstall in the car. I did one and noticed the color was slightly off from the others. I’m weird that way. Color was very close. But I pulled the rest of the switches on the row out and replaced those for a uniform green. A 100 pack for 6 bucks is a bargain. If you have a Volvo and want to replace bulbs for switches on CCM or lower row of option switches, these are perfect.

Not as depicted in the images: much shorter leads & no covers. The shorter leads issue is important if you want to use this for old Honda console buttons as they have a mount that requires about 25mm leads. These are about half that: 12mm so just barely get to the bottom of the mount (see photo).

I rebuild vintage shortwave radios from the 1970’s and early 1980’s. They still used this kind of bulb as dial and meter lights back then. I use “helping hands” to hold the bulb and leads in-place when soldering the new bulb to a leaded installation. The bulb usually can be tacked on with tweezers and a bit of solder when installing directly on a PC board. The package is essentially a lifetime supply for me. I also appreciate that they can be used to fix indicator lights in my old Jeep Cherokees. Thank-you to the other reviewers for this information as I plan to do so as the need arises.

Bulbs worked great for repairing the green lights on a infinity kappa 102a and 255a.

I ordered these specifically for the green diffusers it shows in every single picture. Luckily I have a ONE green diffuser left and can make this work this one time. Now I have to source out tiny green diffusers or find bulbs with them already on for the next job.

As others have mentioned, these do not come with the green covers as pictured. Disappointing since the cover from my old dash mini bulb does not fit this one. The leads on this bulb are also very thin. If you have this bulb soldered on a board with any distance between board and bulb base, it may move on you. That is a simple fix with a dab of silicone. IF this bulb lasts it would be a good value.

good