ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega-2560 only

Works perfectly with a mega board and shield

Didnt realize you needed to buy a shield for it untill after I got it.

Can only get a white screen. Libraries and sample code listed does not work. Sadly, I am past the 30 day window so will look for another option

Perfect match for broken screen I needed to replace.

Was good but didn't work for what I needed it for.

I have had a Mega 2560 from an old project for a few years and just didn't know what I wanted to do with it. this has made me rethink my tinkering again and I have now tried a few projects with it. I have 1 project that I am currently working on to get a touchscreen setup for my homemade 3d printer, using a ramps board and the Mega 2560 as the controller. Thanks for sparking my interests again.

I got the DIYmalls ILI9341 3.2-inch TFT LCD Display Screen Module to use for some of my DIY and IoT projects. It is designed to be used with a Mega-2560 and it does need a shield. It appears to be made from quality materials and should work nicely for my projects. Make sure you are aware that itheILI9341 TFT display has 40 pins, so it is not compatible with Uno and Nano, and it works at 3.3V. If you use it for mega-2560, please insert TFT 3.2 shield, not directly connect board with TFT LCD module.My first project is making a controller for a semi-homemade 3D printer. There are a lot of resources online that will help walk you through using it and will give you some ideas for additional projects. So far, everything is working out well and I can see repurposing the screen for additional projects down the road or I can buy another one as they are inexpensive. I can recommend theDIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module!