GORILLA GRIP Extra Strong Rug Pad Gripper, Grips Keep Area Rugs Safe and in Place, Thick, Slip and Skid Resistant Pads for Hard Floors Under Carpet Mat Cushion and Hardwood Floor Protection 2x3 FT

As minor annoyances go, a rug that refuses to lie flat is fairly maddening. I bought a 6x9 rug that I wanted to put on top of some wall-to-wall carpeting to freshen up the living room. Once unrolled and smoothed out, I thought that would be the end of it. As if it had a will of its own, the rug would insist on bunching and curving overnight, mocking my insistence for order! Checking the interwebs, I found I needed some sort of underlayment to keep the damn thing in one spot. One handy-dandy search on Amazon found my solution. Gorilla-grip to the rescue! A little tricky to layout (make sure to mark-out where you want the carpet to land with some tape you can remove later), spread out the gripper material on the ground film-side up, then remove that film and smooth the whole thing out flat. The material is slightly tacky, so it's not going to leave any weird residue if you ever want to remove it. It's been 3 days, and that 6x9 rug hasn't moved a nanometer! I am a happy camper, as order has been returned to my life! Buy with confidence!

I am very pleased with this product. The rug gripping mat has been down for about a week and has held the upper rug in place and with no bunching to date. I did have to put corner and side holding tape down also because the mat did not reach the edges, but that didn't cause any problems. Rug combing and sweeping has not caused any upper rug moving either. I have my fingers crossed that this mat will continue to stay in place and hold the upper rug in place to for a long time.

Works really well but you will break a sweat getting the plastic film off. The directions say to lay it on the floor with the plastic film up. Then smooth out, remove the film and place your rug. Sounds easy doesn't it? Absolutely not. You cannot remove the film without juggling the rug pad and wrenching the film off. I have done this twice and both times had a helper and really could have used a third person. It's awful and pretty sticky. However, once you get it placed and under the rug, it holds really well. My rugs are thin and this has held them on top of the wall to wall carpeting for over a year with no moving at all. No bunching or anything. Would I buy it again? Yes. But I will dread every moment leading up to the placement of it until it is over. Will it leave a residue on your wall to wall? Probably. But I will deal with that when I need to.

I have an 8’x10’ rug over a 10’x14’ rug. I could not keep the top rug from creeping and buckling until I bought and installed this mat. No movement what so ever! So impressed. Please do take your time installing, getting the creases out and you should have the same results!

THIS STUFF IS AWESOME!! We've struggled to keep our indoor/outdoor rubber backed mat in place at the top of the stairs so the end of the mat didn't hang over the top step. Even just 1" over would cause a tripping hazard. Once I got this, I put it on the back of the mat, laid the mat in place and it hasn't move one bit!! Easy to cut to size, apply and worth every penny!

I am so happy with these rug grippers by Gorilla Grip! To ensure both the rug gripper and rug remain in place, below are a few tips, which -- by trial and error -- worked perfectly for us.I have several thick throw rugs in my various bathrooms, each with a so-called non-skid rubber-like coating on the bottom, all of which never stayed in place. I lost count of the number of times I purchased similar rug grippers to this one (but never before by Gorilla Grip) -- from Bed, Bath & Beyond, Walmart, etc. Frustratingly, NONE held the rugs or the grippers in place, i.e., not only would the rug still move, but then the (other brand) grippers would "sneak out" beyond the border of the rug and look "tacky".These rug grippers were delivered on 10/26/2024, and we put them in place that day. Today is 12/30/2024, and they have not budged even a half inch after experimenting with different options and finding a solution that worked. TIPS:1) We cut each rug gripper in a rectangle shape to almost exactly ONE INCH from the edge all around each rug (you will need that small uncovered border near the edge of each rug not protected by the gripper pad for this solution to work).2) We first tried professional-grade MASKING TAPE. It did not stick at all to the non-stick rug bottom and it popped right off. Then we tried ProTape's professional PAINTER'S TAPE. That also did not adhere the non-stick rug bottom, and it, too, popped right off.3) On our third try, we added a continuous strip of GORILLA TAPE (Mini Duct Tape To-Go, 1" x 10 yd Travel Size), not their two-sided tape (https://www.amazon.com/gp/product/B001E5ZWT4/). We placed the MIDDLE of the Gorilla Tape over the rug gripper so that one-half inch of it covered the UNCOVERED border of the rug bottom, and the other half-inch was OVER the rug gripper.4) We are using the pet tool of a Black & Decker hand-vac to vacuum each rug on a weekly basis (if the rugs are visibly dirty and need to be washed, you likely will need to remove the Gorilla tape and rug gripper and see if the tape adheres after the rug is fully dry).One, I cannot say what the success rate would be if we did not take the extra step of using the Gorilla Tape. Two, I have never purchased woven/cotton rugs, such as those with fringed edges, so I don't know if our solution will work with them . Thus far, however, I am more than pleased that my rugs are not slipping and sliding, and that the rug grippers do not show beyond the edges of the rugs. I highly recommend this product.