Stand for MagSafe Charger, OMOTON Foldable Phone Stand Holder for MagSafe Accessories, Not Include Charger or Cable, Compatible with iPhone 15/14/13/12 Pro Max/Pro/Mini, Silver

I’m a “Vine” reviewer but I actually bought this, really ( I wish Amazon would have given me one of these). So, I recently purchased a iPhone 14 Pro Max. I ditched my wired car charger for a wireless one and found it’s pretty convenient this wireless charging. So I went looking. I mean, who doesn’t want to be able to just lay your phone down and let it charge. I really wanted a pad but most if not all of them didn’t seem like they would work with MagSafe and then there’s the issue with my MagSafe case and wether it would interfere with charging. So I started looking for “pucks”. There was the infamous Apple puck and some knockoffs that were much less expensive. So I thought just get the puck and put it on my bedside table. THEN I saw a YT video that was made about 2 years ago which lamented that “wireless” charging with a puck really wasn’t a step up from wired charging. Their reasoning was that even if you slapped your phone on the puck it really took two hands to disengage the phone from the puck. Made sense to me. Started looking for stands and found some that looked pretty cheesy and a lot weren’t able to handle/support the 14 PM. Then I found some mat like things that you put your charging puck into and then they “stuck” to what ever surface you wanted. Ok, made sense that you could drop your phone on it and then pick it up one handed but the stick’um they used tended to stay stuck and make a mess if you decided to move it to another location. Then there were a couple of cylinder things that you place your phone on. They had the same problem that they were beefy enough to be able to one hand remove your phone and used the “stick’um” solution. Not to mention they were pricey. Back to the stands. Found some that would seem to work but some of the reviews stated that either they weren’t sturdy enough for the 14PM or that removing the phone was not one handed in that the stand would not work. Then I found this Omoton stand. Lots of good reviews, inexpensive (that really means cheap), well made and it was deliverable the day I ordered it. It was ordered at “ o dark thirty” and arrived at 1900 same day believe it or not. Mine is silver and no I didn’t get it to match my Mac set up, I liked the silver. Let me tell you it is very sturdy, you adjust it to the height and angle you want and it isn’t going anywhere even with that brick of a 14 PM. You don’t have to worry about that humongous camera bump that other stands have problems with not allowing the phone to sit flush with the puck causing “iffy” or no charging. The rubber “cup” that you insert your MagSafe puck into juts out just enough so the camera surround on my Torras Magnetic Guardian case does not touch the stand. Not sure if “your” case will have the same fit but probably so. So, good looking, well made, cheap and it just works. Now for the bad news. The rubber cup fits the Apple MagSafe charger. Most of the knockoff chargers I found were dimensionally larger that the Apple product. The good news was that the Apple puck can charge up to 15w while the knockoffs seem to be limited to 7w. Yeah, I wound up buying the Apple puck with that short cord and why they couldn’t make it longer and out of braided cord I don’t know. Anyway, the whole setup works great. This is a “MAJOR, MAJOR WIN”, if you know what I mean. Cheers

A few more details that may not have been in the product description:Design - The joints can be easily moved without the phone on but are stiff so once adjusted they will hold their position. There are four rubber feet on the bottom to prevent scratching and two on the middle panel (presumably to prevent damage if you collapse it for travel). The grey insert is silicone and does a great job snuggly holding an Apple MagSafe Charger in place.Compatibility - This product is meant to be used with a separately purchased mag charger (not included). The cord easily runs through the hole in the middle panel so no tight turns or crimping of your cord except in the completely collapsed position. Just remember to remove the MagSafe Charger from the stand for travel. I also use a MagSafe approved phone case and as long as it works with your charger now, you should have no issues.Dimensions - The stand weighs 244 grams (8.25 ounces) or roughly between the weight of an iPhone 14 and iPhone 14 Max so it feels sturdy but at just over half a pound, it's not unreasonable for use in travel and collapses to just 2.5cm x 9cm x 12.25cm (1in x 3.5in x 5in).Material - It appears to be made of aluminum or an aluminum alloy so metallic, but not heavy. Does seem durable. You won't be worried about damage.Overall - If you already have an Apple Mag Safe charger but don't want it to lay flat (i.e., upright on a nightstand so you can check the time and weather without fumbling for the light), then this is the right product for you. At the listed price, it's much better than purchasing a stand with the charger built in.Everything I was looking for and nothing extra - Great value.

I've had an Omoton stand for my iPhone for a few years now and It's truly been one of my very favorite Amazon purchases (and there have been a lot). It's such a simple thing, but having a "home" to park your phone while it's charging or when you're on a call makes a big difference somehow. When I first started looking for a phone stand, I randomly chose Omoton's out of several and am glad I did. The build quality and finish is impeccable - it feels like a premium object that should be a lot more expensive than it is. It's provided me with years of satisfying and hassle-free use. Later, when I wanted to get a stand for my laptop Omoton was the logical choice, and that's been a great purchase as well. And then when it came time to replace my beloved phone stand with a new one that could accommodate my new Apple MagSafe charger and my new iPhone 15 Pro, the choice was obvious. If anything, the MagSafe charger folding stand is even better than my previous one. It is hefty and substantial, and with a nice range of adjustability - and the fact that it folds flat for travel is an excellent feature. I really can't recommend it highly enough and would give it ten stars if I could ... partly to offset all the negative reviews complaining that it didn't come with a MagSafe charger. (Don't people read item descriptions anymore?) If you're expecting this to charge your phone on its own, you will be very disappointed. However, if you already own an Apple MagSafe charger and want the very best stand possible for it while It's charging your phone, Omoton's foldable MagSafe phone stand is the way to go.

I got this item some time back and I love it a to. It is very good stand and will last for a very long time. The stand bends in so many way. The price was not bad, it was well within my pocket book. There is not more to say about the stand (It’s just good).Hope this helps.